2N 9159014 Bedienungsanleitung


Lies die bedienungsanleitung für 2N 9159014 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 7 Bewertungen. Hast du eine Frage zu 2N 9159014 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
9159014
2N
®
2Wire
Product features
- Using legacy analog 2 wire cabling for IP intercom connection including PoE power
supply
- Saves cost for UTP cabling and makes possible to install IP intercoms on legacy
infrastructure
- Alternatively one master unit can support up to four slaves
- Long range Ethernet extension over 2 wires or coax
- IEEE 802.3 af/at Compliant 40 Watt PoE+ for IP intercom power supply
- Easy configuration, no IP address and network setup required, plug&play
- Calculated MTBF = 340,000 hours
Includes
- 2pcs converter unit with Coax / 2 wire adaptor
- 1pc power supply adaptor
Product use
- Install master unit where your ethernet cable ends and 2 cable wiring begins.
- Plug in Ethernet and 2 cable wiring into 2N
®
2Wire.
- Install slave unit where you need convert 2 cable wiring back to Ethernet at
remote location. Please observe polarity, - port of master unit must be
connected to port of slave unit and + port of master unit must be
connected to + port of slave unit.
- Connect provided power supply to master unit.
- Any of the units can be master or slave. Master unit is the one with connected
power supply, while slave is powered via 2 wires
- Blue Power LED indicators should indicate that both units are powered
- Both BNC and PoE green LED should be blinking, thus signalling established
connection and data transmission.
!
Not respecting the polarity can cause
damage or destruction of one or both units.


Produktspezifikationen

Marke: 2N
Kategorie: Nicht kategorisiert
Modell: 9159014

Brauchst du Hilfe?

Wenn Sie Hilfe mit 2N 9159014 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten