3M 6650-LC Bedienungsanleitung
Lies die bedienungsanleitung für 3M 6650-LC (28 Seiten) kostenlos online; sie gehört zur Kategorie Niemals. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 18 Bewertungen. Hast du eine Frage zu 3M 6650-LC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/28
March 2005
78-8135-4385-3-A
3
LC Hot Melt
Fiber Optic Connectors
Installation
2 78-8135-4385-3-A
Contents
1.0 Safety and Helpful Hints ................................................................................................................3
Hot Melt Oven Safety Information ................................................................................................3
2.0 3M™ LC Expansion 6650-LC Kit Contents ...................................................................................4
3.0 3M™ LC Connectors ......................................................................................................................5
4.0 Setup ............... 6
5.0 900 micron Cable Connector Preparation ......................................................................................8
6.0 1.6 – 2.0 mm Jacketed Cable Connector Preparation ....................................................................8
7.0 3.0 mm Jacketed Cable Connector Preparation .............................................................................8
8.0 Strip Guide ..... 9
9.0 Stripping Procedure for 900 micron Fiber .....................................................................................9
10.0 Stripping Procedure for 1.6 – 2.0 mm Jacketed Fiber ....................................................................9
11.0 Stripping Procedure for 3 mm Jacketed Fiber ..............................................................................11
12.0 Connector Mounting ....................................................................................................................12
13.0 Boot Placement for 900 micron Fiber ..........................................................................................14
14.0 Crimping and Boot Placement for 1.6 – 2.0 mm Jacketed Fiber .................................................14
15.0 Crimping and Boot Placement for 3 mm Jacketed Fiber .............................................................16
16.0 Scribing ........ 17
17.0 Multimode Polish .........................................................................................................................18
18.0 Singlemode Polish to –40db .........................................................................................................21
19.0 Singlemode Polish to –55db .........................................................................................................23
20.0 Finishing ....... 24
21.0 Installing Duplex Yokes ................................................................................................................24
22.0 3M™ Expansion Kit 6650-LC and Replacement Part Numbers ...................................................26
78-8135-4385-3-A 3
1.0 Safety and Helpful Hints
Use reagent-grade isopropyl alcohol that is 99% pure to clean the fibers and other components. When
terminating connectors on any cable containing grease, ensure that all grease is wiped away and the buffer,
coating and fiber are thoroughly cleaned with isopropyl alcohol.
Isopropyl alcohol is not shipped with the 3M™ Field Termination Kits; however, a bottle for the alcohol is
included.
Note: Carefully follow safety, health and environmental information given on the container label or the Material
Safety Data Sheet for the isopropyl alcohol.
CAUTION
Do not touch any part of the heating block of the Hot Melt oven during operation.
It is very HOT.
WARNING
• Safety glasses should be worn when working around optical fibers.
• Do not view fiber ends if they are illuminated with a laser.
• Keep oven clear from flammable material.
• Disconnect power supply when cleaning.
Hot Melt Oven Safety Information
This Hot Melt Connector Oven is intended for melting Hot Melt adhesive in Hot Melt Connectors. It has
been designed and tested for use only with the 3M™ Fiber Optic Connectors System. Other uses of this
product may lead to poor performance or an unsafe condition.
WARNING
1. Power cord must be grounded and plugged into a grounded outlet.
2. Eye hazard. Do not view fiber ends if they are laser illuminated as eye
damage may result. Illuminate fiber ends with white light only.
3. Wear safety glasses.
4. No serviceable parts - return unit to the manufacturer for servicing.
5. For indoor use only.
6. To avoid possible environmental contamination, dispose of the unit in
accordance with applicable governmental regulations.
7. Avoid touching hot surfaces.
Explanation of symbols:
Warning - Refer to accompanying documents.
Caution - Risk of electric shock. Refer all servicing to manufacturer.
This is the EU symbol for equipment that is covered under the Waste from Electrical and
Electronic Equipment (WEEE) directive per CENELEC Specification 50419, and it indicates that
certain products should not be discarded in the trash, but rather should be recycled. This applies
to all electronic pluggable and battery powered products.
Produktspezifikationen
| Marke: | 3M |
| Kategorie: | Niemals |
| Modell: | 6650-LC |
Brauchst du Hilfe?
Wenn Sie Hilfe mit 3M 6650-LC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Niemals 3M
20 März 2024
22 Mai 2023
5 November 2022
Bedienungsanleitung Niemals
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2024
15 Juni 2024
15 Juni 2024
18 Mai 2024
4 April 2024
28 März 2024
21 März 2024
15 März 2024
28 Februar 2024
28 Januar 2024