8BitDo M30 RR Bedienungsanleitung


Lies die bedienungsanleitung für 8BitDo M30 RR (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 53 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 27 Bewertungen. Hast du eine Frage zu 8BitDo M30 RR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
For PS4 controller
1. Insert Retro Receiver into console and then press the pairing button (the LED will rapidly blink)
2. Press and hold the Share and PS buttons until the lightbar begins to strobe quickly in double.
3. Wait until your Retro Receiver's LED is solid blue and the controller's lightbar stay on.
4. For next connection only need to press PS button and wait until receiver's LED is solid blue.
MODE START
DPAD
Z
A
Y
C
B
X
For PS3 controller
1. Download and Run 8BitDo Retro Receiver Tools on your PC available for Mac and PC.
2. On your Retro Receiver, hold down the pairing button and connect it to your MAC/PC via USB.
3. Connect your PS3 controller to MAC/PC via USB.
4. Once your Retro Receiver and PS3 controller are both connected via USB, click the "Pair" button
in the soware.
5. Once pairing is complete, you can insert your Retro Receiver into your console.
6. Now press the PS button on your PS3 controller.
7. Wait until your Retro Receiver's LED is solid blue and the controller's #1 LED stay on.
8. To re-sync aer powering your console down, begin from step 6.
Retro Receiver
for original Genesis & Mega Drive
• 6 button mode <=> 3 button mode switching can be achieved by pressing button on the mode
controller for 3 seconds. LED on the receiver will blink twice to indicate the change


Produktspezifikationen

Marke: 8BitDo
Kategorie: Nicht kategorisiert
Modell: M30 RR

Brauchst du Hilfe?

Wenn Sie Hilfe mit 8BitDo M30 RR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten