Access Lighting Vision 50030 Bedienungsanleitung
Access Lighting
Nicht kategorisiert
Vision 50030
Lies die bedienungsanleitung für Access Lighting Vision 50030 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Access Lighting Vision 50030 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
CER A TIFIC TION: cULus AMP D
NO. 50030, 50031, 50032, 50033, 50034, 50035
INSTALLATION INSTRUCTIONS
IMPORTANT
Before assembling your ACCESS LIGHTING fixture, please make sure that
you r carefully read th ough this inst Save these instructions ruction sheet.
and refer to them when additions to or changes in the fixture
configuration are made.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
CONSUL TER UN ELECTRICIEN QUALIFIE POUR V OUS ASSURER QUE LES
CONDUCTEURS DE LA DERIVATION SONT ADEQUATS
THIS PRODUCT MUST TBE INS ALLED AIN CCOR ANCE APPLICABLE D WITH THE
INST AALL TION CODE BY A PERSON FAMILIAR WITH THE CONTSTRUCTION
AND OPERATION OF THE PRODUCT VOLAND THE HAZARDS IN VED.
CE T PRODUIT DOIT ETRE INS ALLE SEL ON LE CODE D’INST AALL TION T,PERTINEN
PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHERENTS
NOTE: The r r impo tant safeguards and inst uctions that appear in this
manual v are not meant to co er all possible conditions and situations
COLLECTION
APPLICATION NO.MODEL
that may r. m e, occu It ust be understood that common sens caution and
care, are factors nthat ca ’t any pr be built into oduct. These factors must
be supplied by the person(s) fcaring or r eand ope ating the fixtur .
GENERAL AINFORM TION
All electrical connections m s,ust be in accordance with all ordinance
Local Electrical and National s. Code These fixtures fare intended or
mounting a x 2 to standard 4” 1/2”metal octagon outlet box. boThe x
m r by ust be directly suppo ted the building r U Rst ucture and .L. ecognized.
STEP RBY STEP INST UCTIONS
Vision
WHAT WE
PROVIDE
•
Crossbar
• Mounting
Hardware
• Canopy with
So etsck
• 1 x Glass
Shade
Ceiling
50030
WHAT YOU NEED
• Philips Screwdriver
• Wire Cutters
• Wiring Supplies as
Specified by Electrical Code
Bef r y ore sta ting our installation Powdisconnect the er by tur ning off the
Circuit k bBrea er or y removing bo rthe fuse at the fuse x. Just tu ning the
light s ch off at the light wit is not sufficient v cto pre ent electrical sho k.
• 1 x R7s Base
B ulb
(Model dependent)
Model 50030/31: 1 x 200W
Model 50032: 2 x 150W
Model 50033/34: 1 x 150W
Model 50035: 2 x 15 0W
PREPARE FIXTURE
If is there e ve an xisting fixture remo
it.
Expose outlet fr the supply wires om the
bo
x.
Secure the crossbar the to J-box with the supplied
scre
ws
1
CER A TIFIC TION: cULus AMP D
NO. 50030, 50031, 50032, 50033, 50034, 50035
3
2
4
CONNECT
THE
WIRES
Gently pull the supply wires r th ough the hole in the
cr r. ossba
Connect
the k cbla supply
wire to the
black
fixture
wir . e
Secure
with the
supplied
wire
nuts.
Connect
the white supply
wire to the white fixture
e.wir
Secure
with the
supplied
wire s. nut Either wrap the
green
wire
ar ound
one the of
protr e uding scr ws
or
connect
it
to
the
supply gr ound wire.
Secure
all U wires with .L.
Certified electrical tape
(not
supplied).
Tuck all wires carefully
into the
J-box.
MOUNT THE
CANOPY
Hold py cr r. the fixture cano up to the ossba Align
the
holes in py the cano with the designated retaining
screws
of cr r. ew the ossba Using the supplied scr nuts secure
the
canopy to the
cr r.ossba
INSE ANDRT THE BULB BULB
COVER
Inse the supplied and bulbrt bulb
cover.
Do Halo ch not tou the g en bulb with bare
hands.
Use a of soft dry cloth is
recommended.
MAXIMUM WATTAGE 200W
.
DO NOT EXCEED THE
RECOMMENDED
WATTAGE AS
STATED WON THE ARNING LABEL
AND
INSTRUCTION SHEET.
2
CER A TIFIC TION: cULus AMP D
NO. 50030, 50031, 50032, 50033, 50034, 50035
6
5
SECURE GLASS SHADE
Hold py the glass shade up to the cano and secure
with ew s.the supplied scr knob
RESTORE THE
ELECTRICITY
AND
CHECK THE
OPERATION
OF YOUR
NEW
ACCESS LIGHTING
FIXTURE
IMPORTANT SAFETY INSTRUCTIONS MESURES DE A RESPECTURESECURITE
• Do not install this fixture in hazardous locations. N'installez pas cet appareil dans des emplacements dangereux.
• Do not install any fixture assembly closer than 6 Laisser une distance d’au moins 6 pouces entre ce
inches from curtain or similar combustible material. Luminaire et la toute surface combustible.
• WARNING: Risk and Fire and Electric Shock. CAUTION: Risque d’ Incendie et de Choc Electriques.
Save these instructions and refer to them when additions to or changes in the fixture configuration are made.
3
CAUTION
Please ensure that the fitting is cool and switched off
before replacing the bulb.DO NOT use bulbs that might
exceed the maximum wattage, stated on caution label.
Produktspezifikationen
| Marke: | Access Lighting |
| Kategorie: | Nicht kategorisiert |
| Modell: | Vision 50030 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Access Lighting Vision 50030 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Access Lighting
7 Juli 2025
7 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- OK
- Balance
- Ford
- Laine
- SunPower
- Atdec
- American DJ
- Peltor
- Optoma
- Graflex
- Vocopro
- Traco Power
- Cadel
- Videon
- Tamiya
Neueste Bedienungsanleitung für -Kategorien-
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025