Acer K242HLD Bedienungsanleitung

Lies die bedienungsanleitung für Acer K242HLD (3 Seiten) kostenlos online; sie gehört zur Kategorie Monitor. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Acer K242HLD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

English

Attaching th

Attaching th

Attaching th

Attaching the monitor

e monitor

e monitor

e monitor to the base

to the base

to the base

to the base

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

Turn off the LCD monitor and unplug the power cord.

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely

damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform

servicing of any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor

outside this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances

occur:

Monitor-to-PC signal cable is frayed or damaged.

Liquid spills onto the LCD monitor or the monitor is exposed to rain.

The LCD monitor or case is damaged.

Package contents

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power

cord.

back of the monitor.

into a nearby electrical outlet.

Attaching th

Attaching th

Attaching th

Attaching thAttaching the monitor

e monitor

e monitor

e monitor e monitor to the base

to the base

to the base

to the base to the base

1Remove the monitor base from the packaging and place it on a stable and level workspace.

2Remove the monitor from the packaging.

3Align the release button at the buttom of the monitor with the corresponding slot at the bottom of

the base. A clicking sound signifies that the monitor has been securely attached to the base.

Attaching th

Attaching th

Attaching th

Attaching the monitor

e monitor

e monitor

e monitor to the base

to the base

to the base

to the base

LCD

monitor Power cordVGA cable

(optional)

DVI cable Quick start

(optional) guide

3. Insert the monitor power cable into the power port at the

4. Plug the power cords of your computer and your monitor



HDMI Cable

(Op ionl)ta

2. Connect the signal cable to the VGA and/or DVI-D/HDMI

output

the computer. Then tighten

the signal cable connector.

input socket of the monitor, and the

VGA and/or DVI-D/

(optional)

socket of

the graphics card onthe

thumbscrews on

HDMI

(optional)

2

Produktspezifikationen