ACTi A951 Bedienungsanleitung
ACTi
Nicht kategorisiert
A951
Lies die bedienungsanleitung für ACTi A951 (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu ACTi A951 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5

A951 Outdoor Speed Dome Camera Quick Installation Guide
This guide is for quick installing and connecting A951 Outdoor Speed Dome Camera. For more details, please refer to
the Hardware Manual.
Installation Notices
This camera must be installed by qualified personnel and the installation should conform to all local codes.
Do not replace batteries of the camera. Risk of explosion may occur if the battery is replaced by an incorrect type.
To use an external power supply, please contact the camera manufacturer to confirm that the power supply
complies with the requirements and shares the same power specifications with the camera.
For safety concern, please hook up the camera with the anti-drop chain of the
pendant when installing the camera. For more information about mounting
accessories, please contact Sales.
Camera’s Connectors
No.
Connector
Definition
Remarks
1
Reset Button
Press the button with a proper tool for at least 20 seconds to restore the system.
2
RJ-45 Port
For network and UPoE connections
#Please contact the manufacturer for
compatible PoE injector.
3
Power (AC24V)
AC24V power connection
4
Alarm I/O
& RS-485 Connector*
Alarm I/O
& RS-485 connection
# Do NOT connect external power supply to
the alarm I/O connector of the camera.
5
Memory Card Slot
Insert the memory card into the card slot to store videos and snapshots. Do not
remove the memory card when the camera is powered on.
NOTE: It is not recommended to record with the memory card for 24/7 continuously, as it may not be able to
support long term continuous data read/write. Please contact the manufacturer of the memory card for
information regarding the reliability and the life expectancy.
Power Connection
To power up the camera, connect the bundled AC24V power adaptor to the power connector of the camera and the
power outlet. Refer to the diagram and pin definition below.
Pin
Definition
Terminal Block Label
Power Adaptor Cable
1
AC24V L
AC2
Blue
2
GND
Ground
Green-Yellow
3
AC24V N
AC1
Brown
Alternatively, users can use an Ethernet cable and connect it to the RJ-45 port of the camera and a UPoE 60W
switch.
Ethernet Cable Connection
Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to
the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the
PC.
NOTE: Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please check
the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
NOTE: The ITE is to be connected only to PoE networks without routing to the outside plant or equivalent
description.
AIarm I/O & RS-485 Connection
Please refer to the diagram and pin definition tables below for audio/alarm I/O & RS-485 connection.
Pin
Definition
Pin
Definition
Pin
Definition
Pin
Definition
1
N/A
5
Alarm Out B1
9
Alarm In 4
13
GND (Alarm I/O and RS-485)
2
GND (Audio I/O)
6
Alarm Out B2
10
Alarm In 3
14
N/A
3
Alarm Out A1
7
RS-485 D+ (Optional)
11
Alarm In 2
4
Alarm Out A2
8
RS-485 D- (Optional)
12
Alarm In 1
Produktspezifikationen
| Marke: | ACTi |
| Kategorie: | Nicht kategorisiert |
| Modell: | A951 |
| Unterstützte Audioformate: | AAC, PCM |
| WLAN: | Nein |
| Bluetooth: | Nein |
| Gewicht: | 8900 g |
| Produktfarbe: | Weiß |
| Internationale Schutzart (IP-Code): | IP66 |
| Übertragungstechnik: | Kabelgebunden |
| Höhe: | 431 mm |
| Energiequelle: | AC, PoE |
| Befestigungstyp: | Decke/Wand |
| AC Eingangsspannung: | 24 V |
| Betriebstemperatur: | -40 - 60 °C |
| Relative Luftfeuchtigkeit in Betrieb: | 10 - 90 % |
| Netzstandard: | IEEE 802.1x |
| Unterstützte Netzwerkprotokolle: | IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, SMTP, FTP, IGMP, ICMP, ARP, UPnP, QoS, SNMP, IEEE 802.1X |
| Quality of Service (QoS) Support: | Ja |
| Sprachcodec: | G.711, G.726 |
| Zertifizierung: | CE, FCC |
| Anzahl Ethernet-LAN-Anschlüsse (RJ-45): | 1 |
| Typ: | IP-Sicherheitskamera |
| Stromverbrauch (max.): | 55 W |
| Gehäusematerial: | Metal, Plastic |
| Audio-System: | 2-Wege |
| Unterstützte Grafik-Auflösungen: | 1280 x 720 (HD 720), 3840 x 2160 |
| Autofokus: | Ja |
| Zoom-Fähigkeit: | Ja |
| Geräuschunterdrückung: | Ja |
| Größe des Bildsensors: | 1/1.8 " |
| PTZ Kontrolle: | Ja |
| Schwenkbereich: | 0 - 360 ° |
| Neigungswinkelbereich: | -10 - 100 ° |
| Formfaktor: | Dome |
| Kompatible Speicherkarten: | MicroSDHC, MicroSDXC |
| Durchmesser: | 284 mm |
| Integrierter Kartenleser: | Ja |
| Videokompressionsformate: | H.264, H.265, M-JPEG |
| Maximale Auflösung: | 3840 x 2160 Pixel |
| Ethernet Schnittstellen Typ: | Gigabit Ethernet |
| IP-Adressen Filter: | Ja |
| Passwortschutz: | Ja |
| Brennweitenbereich: | 6.5 - 202 mm |
| Bis zu 30 Frames pro Sekunde: | 30 fps |
| Megapixel insgesamt: | 8 MP |
| Anzahl der Kameras: | 1 |
| Tag/ Nachtmodus: | Ja |
| Mindestbeleuchtung: | 0.02 Lux |
| Anzahl der Linsen: | 1 |
| Eingebaute HDD: | Nein |
| Nachtsichtdistanz: | 100 m |
| LED Typ: | IR |
| Videostreaming: | Ja |
| Sensor-Typ: | CMOS |
| Bildstabilisator: | Ja |
| Optischer Zoom: | 31 x |
| Verschlusstyp: | Elektronisch |
| Bildqualitätsanpassung: | Brightness, Contrast, Sharpness |
| Nachtsicht: | Ja |
| Wide Dynamic Range (WDR): | Ja |
| Kamera Verschlusszeit: | 1-1/10000 s |
| Anzahl der Sensoren: | 1 |
| Vollbildverfahren: | Ja |
| Anzahl der effektiven Pixel (H x V): | 3864 x 2180 Pixel |
| Maximale Blendenzahl: | 1.55 |
| Geräuschunterdrückungstechnologie: | 3D-Rauschunterdrückung |
| Datenschutz-Maskierung: | Ja |
| Video-Bewegungsmelder: | Ja |
| Intelligent Video Surveillance-(IVS)-System-Eigenschaften: | Gesichtserkennung |
| Anpassung der Shutter-Geschwindigkeit: | Auto |
| Kameraschwenkkontrolle: | Ja |
| Kamera-Schwenksteuerung: | Ja |
| Stromverbrauch (Power over Ethernet (PoE)): | 51 W |
| Infrarot (IR)-Abschaltfilter: | Ja |
| Betrachtungswinkel (horizontal): | 63.4 ° |
| Betrachtungswinkel (vertikal): | 37.8 ° |
| Warnbenachrichtigungstyp: | |
| HTTPS-Verschlüsselung: | Ja |
| Passwortschutz-Art: | Benutzer |
| Voreinstellung Schalengeschwindigkeit: | 300 °/Sekunde |
| Neigunggeschwindigkeit: | 300 °/Sekunde |
| Voreingestellte Punkte: | Ja |
| PTZ-Modi: | Automatischer Suchlauf |
| Textüberlagerung: | Ja |
| Ethernet/LAN: | Ja |
| Unterstützte Positionierung: | Draußen |
| Wetterfestigkeit: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit ACTi A951 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert ACTi
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
Bedienungsanleitung Nicht kategorisiert
- UNGO
- Tripp
- Grillmeister
- Toolson
- FlammEx
- Esdec
- Chrome-Q
- USAopoly
- EnOcean
- Rockville
- ProUser
- Daytronic
- ECS
- SolarEdge
- Challenge
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026