Adj FX Beam Bedienungsanleitung

Lies die bedienungsanleitung für Adj FX Beam (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu Adj FX Beam oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Unpacking: Thank you for purchasing the by ADJFX Beam Products, LLC. Every has been FX Beam

thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your xture for any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are missing, please contact our toll free

customer support number for further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The ADJ FX Beam is part of ADJ’s continuing pursuit for creating high quality afford-

able fixtures. The FX Beam is a micro pin beam effect powered by a high output 3W white CREE LED.

The beam is a narrow 3 degrees, and when used in multiples creates pure lighting excitement. The FX

Beam has 2 operating modes: Sound Active and Strobe. The Strobe rate is able to be adjusted using

the speed knob. The FX Beam is great for spotting mirror balls, party tables, or retail and trade show

displays. The FX Beam is also suitable for theaters, studios, retail stores, and other similar locations.

Installation:The unit should be mounted using a mounting clamp (not provided), axing it to the

mounting bracket that is provided with the unit. Always ensure that the unit is rmly xed to avoid

vibration and slipping while operating. Always ensure that the structure to which you are attaching the

unit is secure and is able to support a weight of 10 times the unit’s weight. Also, always use a safety

cable that can hold 12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be installed in a place where it is out

of the reach of people’s grasp.

FX BEAM

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.adj.com / E-mail: [email protected]

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.adj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Produktspezifikationen