Adj Micro 3D II Bedienungsanleitung

Adj Lichteffektmaschine Micro 3D II

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adj Micro 3D II (8 Seiten) in der Kategorie Lichteffektmaschine. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 3 Benutzern mit durchschnittlich 4.4 Sternen bewertet

Download PDF

Seite 1/8

User Instructions

1/16

MICRO 3D II

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 3ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 2

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Micro 3D II General Instructions

Micro 3D II Features

Micro 3D II Warranty Registration

The Micro 3D II carries a 1 Year (365 Days) limited warranty. Please

fill out the enclosed warranty card to validate your purchase. All

returned service items whether under warranty or not, must be freight

pre-paid and accompany a return authorization (R.A.) umber. If the n

unit is under warranty you must provide a copy of your proof of pur-

chase invoice. Please contact A customer support for a R.A. numDJ -

ber.

Unpacking: Thank you for purchasing the Micro 3D II by ADJ Prod-

ucts, LLC. Every Micro 3D II has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all equipment necessary to operate the unit has

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions.

Introduction: The Micro 3D II is an simple, small, bright, green and

red laser fixture. The Micro 3D II produces more than 200 beams with

star patterns that may be projected on a wall, ceiling, or dance floor.

The Micro 3D II is a fixture with 2 operating modes; sound stand alone

active and auto. The Micro 3D II’s compact, light weight case design

make it ideal for mobile entertainers, bands, night clubs and bar. For

best results use fog or special effects smoke to enhance the beams

projections.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial operation.

You may also visit us on the web at www.adj.com for any comments

or suggestions. Service For service related issue please contact ADJ®.

Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Stan-

dard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ customer support.

PLEASE recycle the shipping carton whenever possible.

Micro 3D II General Introduction

• 30mW Green Laser

• 80mW Red Laser

• 2 Operating Modes - Sound Active Mode & Auto Mode

• UC Laser IR Wireless Remote Control & Airstream IR (Compatible)

• Dual Hanging Bracket

Micro 3D II Safety Precautions

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 11 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 4

ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 5

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

Micro 3D II Laser Warnings and Safety

NON-INTERLOCKED HOUSING WARNING

The Micro 3D II contains high power laser devices internally. Do not

open the laser housing, due to the potential exposure to unsafe levels

of laser radiation. The laser power levels, if the unit is opened, can

cause instant blindness, skin burns and res.

STOP AND READ ALL LASER SAFETY DATA

OPERATION INSTRUCTIONS AND LASER SAFETY

The light source emitted from this product can potentially cause eye

injury if not set up and used properly. The light source emitted from a

laser is very dierent from any other light sources with which you may

be aware of. Laser light is thousands of times more concentrated

than any light from any other kind of light source. This concentration

of light can cause instant eye injuries, primarily by burning the retina

(the back of your eyeball contatining cells that are sensitive to light).

Even if you cannot feel “heat” from a laser beam, it can still poten-

tially injure or blind you or your audience. Even very small amounts

of laser beam light are potentially hazardous even at long distances.

Laser eye injuries can be sustained faster than you can blink.

Do not think that because this laser splits the laser beam into hun-

dreds of beams and that the laser beam is scanned out in high

speed, that an individual laser beam is safe for eye exposure. This

laser uses dozens of milliwatts of laser power (Class 3B levels inter-

nally) before it splits into multiple beams (Class 3R levels). Many of

the individual beams are potentially hazardous to the eyes.

Do not that because the laser light is moving, it is safe. This is not

true. Nor, do the laser beams always move. Since eye injuries can

occur instantly, it is critical to prevent even the smallest possibility of

any direct eye exposure. In the laser safety regulation, it is not legal

to aim Class 3R lasers in areas which people can get exposed. This

is true even if it is aimed below people’s faces, such as on a dance

oor.

Do not operate the laser without rst reading and understanding

all safety and technical data in this manual.

Always set up and install all laser eects so that all laser light is at

least 3 meters (9.8 feet) above the oor on which people can stand.

Produktspezifikationen

Marke:	Adj
Kategorie:	Lichteffektmaschine
Modell:	Micro 3D II
Breite:	172 mm
Tiefe:	130 mm
Gewicht:	907.2 g
Produkttyp:	Disco Laserprojektor
Produktfarbe:	Schwarz
Steuerung:	Tasten
Höhe:	130 mm
Energiequelle:	AC
Fernbedienung enthalten:	Ja
Stromverbrauch (Standardbetrieb):	9 W
Anzahl:	1
Lichtfarbe:	Green, Red
Beleuchtungsarten:	Auto, Sound activated
Fernbedienungsfunktion:	Ja
Kugeldurchmesser:	- "
Fernbedienungstyp:	IR