AEG BE500302DM Bedienungsanleitung
Seiten 4 Nicht kategorisiert
Lies die Bedienungsanleitung für AEG BE500302DM kostenlos online oder lade das PDF herunter. 3 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Installation Instruction
Warning! Beforeproceedingwith installation, read
the safety informationin theUser Manual.
The oven is designed to be connected to 230 - 240V
~ (50Hz) electricity supply.
The oven has an easily accessible terminal block which
is marked as follows:
Letter L - Live terminal
Letter N - Neutral terminal
- Earth terminal
CAUTION!
This oven must be earthed!
The cable used to connect the oven to the electrical
For UK use only
Connection
via
Min. size
type
Fuse
Cooker
Control
Circuit
2,5 mm²PVC / PVC
twin and
earth
min: 15 A
max: 20 A
It is necessary that you install a double pole switch
between the oven and the electricity supply (mains),
with a minimum gap of 3 mm between the switch
contacts and of a type suitable for the required load in
compliance with the current regulations.
The switch must not break the yellow and green earth
cable at any point.
EN
After installation and connecting, the cable must
be placed so that it cannot at any point reach
a temperature of more than 50°C above the
ambient temperature.
Before the oven is connected, check that the
main fuse and the domestic installation can
support the load; and that the power supply is
properly earthed.
The manufacturer declines any responsibility
should these safety measures not be carried out.
Attention: The new appliance may only be installed and
connected by a registered expert.
Please comply with this. If you do not, any
damage resulting is not covered by the warranty.
Safety information for the installer
• The electrical installation is to be set up so
that the appliance can be isolated from the
mains with a minimum 3 mm all-pole contact
separation.
• Suitable separation devices include e.g.
cut-outs, fuses (screw fuses are to be taken
out of the holder), RCD’s and contactors.
• Anti-shock protection must be provided by the
installation.
• The built-in unit must meet the stability
requirements of DIN 68930.
• Built-in ovens and built-in cooking surfaces
safety reasons, they must only be combined
with appliances from the same manufacturer.
Produktspezifikationen
| Marke: | AEG |
| Kategorie: | Nicht kategorisiert |
| Modell: | BE500302DM |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AEG BE500302DM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert AEG
AEG SD184ZF2 Bedienungsanleitung AEG S83830CTX2 Bedienungsanleitung AEG Lavamat 54811 Bedienungsanleitung AEG G18FS Bedienungsanleitung AEG RDB52311PW Bedienungsanleitung AEG F76084LW Bedienungsanleitung AEG S32900CSW0 Bedienungsanleitung AEG SCS5180PS1 Bedienungsanleitung
Beliebt in Nicht kategorisiert
AEG M2DCP050 Bedienungsanleitung AEG E2WIH250A Bedienungsanleitung AEG E2WIS250A Bedienungsanleitung