Aiptek Air2U E30 Bedienungsanleitung
Aiptek
Lautsprecher
Air2U E30
Lies die bedienungsanleitung für Aiptek Air2U E30 (18 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Aiptek Air2U E30 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/18
www.air2U.eu Page 1
ENMusic Speaker
Product Overview
3
4
5
1
2
9
7
8
6
10
PAIR
1. Volume down (-)
2. Bluetooth/Aux mode Indicator(
)
3. Play /Pause (
)
4. Volume Up (+)
5. Stereo indicator
6. Charging indicator
7. Aux Jack (3.5mm)
8. Charging jack (Micro USB)
9. Power ON/Off
10.Pair
Charging your speaker
Before using your speakers, it is recommended to fully charge the devices to ensure optimal
performance. To charge the speakers, connect the two speakers with the dual USB cable to a USB
port from the power source (e.g. a notebook).
The speaker can be fully charged in around 3.5 hours from empty.
Note: For saving power, please turn off the power if the speakers are not in use.
Pairing the Speaker with Your Bluetooth Device
1. Turn on the Bluetooth function on your smartphone, tablet, or notebook.
2. Turn on two speakers by switching the Power button to “ON”, the blue LED of Bluetooth /AUX
(
) will flash slowly.
3. Wirelessly paring two mono speakers to become stereo speakers:
3-1. Press and hold the “PAIR” button on both speakers until the blue LED of Bluetooth /AUX
(
) and green LED of STEREO on both speakers are flashing rapidly.
3-2. Wait for a few seconds until the green LEDs (STEREO) on both speakers become steady
on. The pairing of both speakers is completed.
4. Set up master speaker and pair with mobile device:
4-1. After both speakers are paired together, press and hold the Play/Pause (
) button on one of
the speakers until the LED indicator of Bluetooth/AUX (
) flashes blue and red rapidly to
start pairing with your mobile device.
4-2. Search or scan for available Bluetooth devices on your mobile device. The master speaker
named “air2U E30” will be found on the list. Select the speaker and CONFIRM to pairing.
This speaker becomes the master speaker identified by mobile device.
4-3. If no action is taken to confirm the paring of the master speaker and your mobile device, the
master speaker will returns to standby mode in steady green after 1 minute. The speaker will
also disappear from the Bluetooth device list. Please resume 4-1 and 4-2 to establish the
paring.
Notice
1. Please refer to the manual of your mobile device about how to activate the Bluetooth function. Key
in password “0000” if it is required during the pairing.
Produktspezifikationen
| Marke: | Aiptek |
| Kategorie: | Lautsprecher |
| Modell: | Air2U E30 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Aiptek Air2U E30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Aiptek
4 September 2025
4 September 2025
4 September 2025
17 September 2024
23 August 2024
22 August 2024
5 August 2024
4 Juli 2024
23 Mai 2024
Bedienungsanleitung Lautsprecher
- BML
- Omnitronic
- American Audio
- Escape
- Hertz
- Elbe
- AquaJam
- M-Audio
- Galaxy Audio
- LENRUE
- Continental Edison
- CSL
- Cabstone
- Premier Mounts
- Audiovector
Neueste Bedienungsanleitung für -Kategorien-
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025