ALC Connect AHSS31 Bedienungsanleitung
ALC
Bewegungsmelder
Connect AHSS31
Lies die bedienungsanleitung für ALC Connect AHSS31 (3 Seiten) kostenlos online; sie gehört zur Kategorie Bewegungsmelder. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu ALC Connect AHSS31 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
QUICK START GUIDE
Motion Detector
Please read these instructions completely
before operating this product.
Model: AHSS31
Compatible with ALC AHS613, AHS616, and
AHS629 Security Systems
u When first turning on the app you will enter the Control Hub (or
System Name you gave) Selection window. Simply tap your
Control Hub to enter.
v
The Status screen will appear. Here you can control the
connected devices as well as access the Scenario, Event and
Setting’s screens.
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
For detailed installation and setup and to view the ALC 1 Year
Limited Warranty, please refer to the complete Connect Series
User’s Guide available on our website:
www.ALCWireless.com/support
For rst time use, batteries are pre-installed (3 AA batteries 3).
Apply the double-sided tape to the rear of the Motion Detector as
shown. Use the thick tape for at wall mount or the thin table for
corner mounting. Select a location between 2-2.5 meters (6-8 ft)
from the oor.
6 to 8 feet
50 feet
110 degree de ion angl s tect e
IMPORTANT: This device needs to be paired with the Control
Hub as follows.
u Since this device is an added accessory, you should have
downloaded the Connect App and installed the ALC Control
Hub as described in the Connect Series owner’s manual.
v At the Status screen, tap .+
w Remove the insulating plastic tab then
open the detector by pressing the tab
at the bottom. Press the Pair button.
x Tap Motion Detector Pair. Tap and
follow the on screen instructions.
At the final screen, enter the Motion
Detector’s name and location and tap
Save.
This Motion Detector is an accessory to be used along with the
Connect series Control Hub Kit. Please refer to this quick start
guide as well as the Connect series owner’s manual, see back
cover for details.
Trouble Pairing?
If it did not detect the
detector, remove the
battery for 5 seconds
and press the Pair button
again. Repeat step 4.
Produktspezifikationen
| Marke: | ALC |
| Kategorie: | Bewegungsmelder |
| Modell: | Connect AHSS31 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit ALC Connect AHSS31 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bewegungsmelder ALC
30 August 2024
Bedienungsanleitung Bewegungsmelder
- Vemer
- König
- Suevia
- BEA
- Pentatech
- Velleman
- TP-Link
- Berker
- Schneider
- Arlo
- Desq
- Theben
- Kopp
- Nexa
- Homematic IP
Neueste Bedienungsanleitung für -Kategorien-
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025