Allen & Heath MixWizard3 12:2 Bedienungsanleitung

Lies die bedienungsanleitung für Allen & Heath MixWizard3 12:2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 9 Bewertungen. Hast du eine Frage zu Allen & Heath MixWizard3 12:2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

WZ3 SYS-LINK Applications Note AP5736 1

SYS-LINK explained

SYS-LINK (system link) is the Allen & Heath connection standard for linking two consoles together to

expand the number of input channels feeding the mixes. One becomes the ‘slave’ to the other ‘master’

console. All the slave console mix busses including main LR, groups and auxes connect directly to the

master console mix busses without using up valuable input channels. The PFL/AFL system is also

linked so that all channels can be monitored using the master console headphones and meters. The

slave console master section is not used as its signals are taken before the mix inserts and output

faders. Both consoles must have the SYS-LINK option fitted. A single multiway cable is all that is

required to link the WZ3 to another Allen & Heath console fitted with SYS-LINK.

SYS-LINK versions 1 and 2

The MixWizard WZ3 uses the more recent SYS-LINK Version 2 standard. This benefits from balanced

interconnections which allow longer cable length with less chance of noise and interference pickup

than the earlier, unbalanced SYS-LINK Version 1. Both versions operate at -2dBu line level. V1 uses

the 25way D-type connector. V2 uses the 37way D-type connector. Two consoles fitted with SYS-LINK

V2 can be linked using a 36-core shielded cable wired one to one to two 37way male D-type

connectors. It is also possible to connect between SYS-LINK V2 and V1. This requires a 37way to

25way adapter cable wired to unbalance the connections. Wiring details are provided later. The

interconnecting cable is not included in the kit and should be sourced elsewhere or ordered separately

from Allen & Heath.

WZ316:2 / WZ312:2 / WZ320S SYS-LINK V2 output option

Option kit W312/16-SLV2 is available from Allen & Heath. This can

be installed in the WZ316:2,WZ312:2or WZ320S console to provide

a SYS-LINK V2 output connection. Note that an input connection is

not provided. These consoles may be used as ‘slave’ channel

expanders only. For information on fitting the option refer to

document AP5735.

WZ314:4:2 SYS-LINK V2 input and output option

Option kit W31442-SLV2 is available from

Allen & Heath. This can be installed in the

WZ314:4:2console to provide both SYS-LINK

V2 input and output. The console may be

used as either a ‘slave’ or a ‘master’. For

information on fitting the option refer to

document AP5737.

ALLEN&HEATH WZ3 SYS-LINK V2 AP5736 issue 3

Applications Note

Produktspezifikationen