Alphacool HDX Apex Bedienungsanleitung
Alphacool
Nicht kategorisiert
HDX Apex
Lies die bedienungsanleitung für Alphacool HDX Apex (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Alphacool HDX Apex oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

1
3
Assembly
2
No Chips at bottom
Chips at bottom
2x 20 mm x 68 mm
Thermal Pad 0.5 mm
1x 20 mm x 68 mm
Thermal Pad 1.5 mm
1x Clip
ACCESSORIES ZUBEHÖR ACCESSOIRES
Lisez les instructions de sécurité avant de commencer l‘installation.
FR
!
DE
Lesen Sie die Sicherheitshinweise, bevor Sie mit der Installation beginnen.
!
EN
Read the safety instructions before starting the installation.
!
ALPHACOOL HDX APEX M.2 2280 SSD COOLER
1.
EN DE FR
If the PCB has memory chips mounted on
both sides, use the 0.5 mm thermal pad on
both sides. If the memory chips are only
mounted on one side, use the 1.5 mm thermal
pad on the side without chips.
Bei einer beidseitigen Bestückung des PCBs
mit Speicherchips, verwenden Sie auf beiden
Seiten das 0,5 mm Wärmeleitpad. Sind nur
auf einer Seite Speicherchips verbaut, dann
verwenden Sie auf der Seite ohne Chips das
1.5 mm Wärmeleitpad.
Si les puces de mémoire sont montées des
deux côtés du circuit imprimé, utilisez le
coussinet thermique de 0,5 mm des deux
côtés. Si les puces de mémoire ne sont
installées que d'un côté, utilisez le coussinet
thermique de 1,5 mm du côté sans puce.
2.
EN DE FR
Remove the protective foils from the thermal
pads and place the pads on the SSD as
shown. Place the SSD with the thermal pads
on the clip and xate them with the cooler.
Entfernen Sie die Schutzfolien der
Wärmeleitpads und legen Sie die Pads wie
dargestellt an die SSD. Plazieren Sie die SSD
und die Wärmeleitpads in die Klammer und
xieren Sie alles mit dem Kühler.
Retirez les feuilles de protection des
coussinets thermiques et placez les
coussinets sur le SSD comme indiqué. Placez
le SSD avec les coussinets thermiques sur le
clip et xez-les avec le refroidisseur.
0.5 mm pad
0.5 mm pad
0.5 mm pad
1.5 mm pad
Thin Thermal Pad on side of the M.2 stickone
Thin Thermal Pad on sides of the M.2 stickboth

Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874 - 0
Fax: +49 (0) 531 28874 - 22
E-Mail: info@alphacool.com
www.alphacool.com
General Managers: Andreas Rudnicki, Nathanael Draht, Fabian Noelte
WEEE-Reg.-Nr.: DE 54464644
Trade Register: Amtsgericht Braunschweig HRB 202390
VAT.ID.Nr.: DE270458421
Tax number: 13/207/02047
V.1.00-09.2021
EN DE FR
You can connect the M.2 cooler to other
components of your cooling circuit.
Sie können den M.2 Kühler mit anderen
Komponenten Ihres Kühlkreislaufs
verbinden.
Vous pouvez connecter le refroidisseur M.2 à
d'autres composants de votre circuit de
refroidissement.
3.
Connecting the M.2 cooler with other components
Example of a water cooling loop.
Components shown are not included.
Beispiel für einen Wasserkühlkreislauf.
Die abgebildeten Komponenten sind nicht
enthalten.
Exemple d'une boucle de refroidissement à l'eau.
Les composants représentés ne sont pas inclus.
Produktspezifikationen
Marke: | Alphacool |
Kategorie: | Nicht kategorisiert |
Modell: | HDX Apex |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Alphacool HDX Apex benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Alphacool
30 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Vornado
- Mad Dog
- Thomson
- Silicon Power
- Razorri
- AEG
- Mockmill
- VMV
- Creamsource
- Watercool
- Orange
- Tesseract Modular
- Envitec
- Positive Grid
- Roidmi
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025