Alpine CDE-110UB Bedienungsanleitung

Lies die bedienungsanleitung für Alpine CDE-110UB (2 Seiten) kostenlos online; sie gehört zur Kategorie Autoradio. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu Alpine CDE-110UB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Adjusting BassLevel/Treble Level/

Balance(BetweenLeft andRight)/Fader

(Between Front and Rear)

1

PressRotary encoder(AUDIO)repeatedly to

choose the desired mode.

Each press changes the mode as follows:

BASS TREBLE BALANCE FADER Return to normal

mode

Bass: -12 ~ +12dB

Treble: -12 ~ +12dB

Balance : L15 ~ R15

Fader : R15 ~ F15

•If no operation is performed for 5 seconds after selecting the BASS,

TREBLE, BALANCE or FADER mode, the unit automatically returns

to normal mode.

2

Turn the Rotary encoder until the desired sound is

obtained in each mode.

Equalizer Presets(Factory’s EQ)

6 typical equalizer settings are preset at the factory for a variety of

musical source material.

PressSOUNDrepeatedly until the desired Factory’s EQ

type is displayed.

With each press of the button, the equalizer modewill display

the selected equalizer characteristic.

FLAT(OFF) ROCK POP JAZZ VOCAL CLUB

FLAT(OFF)

Sound Setting

SOUND

Rotary encoder (AUDIO)

Supported playback sampling rates and bit rates

MP3

WMA

This device may not play back correctly depending on sampling

rates.

ID3 tags/WMA tags

This device supports ID3 tag and WMA tag.

If tag data is in an MP3/WMA file, this device can display

the title (track title), artist name,and albumname ID3 tag/WMA

tag data.

This devicecanonly display up to 64 characters. (Unicoded file

and folder names are up to 32 characters.)

For non-supported charactersand symbols an asterisk is

displayed.

If informationcontains characters otherthanID3 tag information,

the audio file may not be played back.

Thetag information may not be correctly displayed, depending

on the contents.

Producing MP3/WMA discs

MP3/WMA files are prepared, then writtento a CD-R or

CD-RW using CD-R writing software. A disc can hold up to255

files/folders (including Root Folders), and the maximum number

of folders is 255.

Playbackmay not be performed if a discexceeds the limitations

described above.

Media supported

Themedia that this device can play back are CD-ROMs, CD-Rs,

and CD-RWs.

Corresponding File Systems

This device supports discs formatted with ISO9660 Level 1 or

Level 2.

This device also can play back discs in Joliet, Romeo, etc., and

other standards that conform to ISO9660. However, sometimes

the file names, foldernames,etc., are not displayed correctly.

Formats supported

This device supports Multi-Session.

This devicecannot correctly play back discs recorded with

TrackAtOnceor packet writing.

Apple HFS, UDF 1.50, Mixed Mode CD and Enhanced CD (CD-

Extra) are not supported.

Order of files

Files are played back in the order that the writing software writes

themtothedisc. Therefore, the playback order may not be what

isexpected. Verify the writing order in the software’s

documentation.The playback order of the folders and files is as

follows.

*The folder No./ folder Name will not be displayed if no file is

contained in the folder.

Bit rate

This is the “sound” compression rate specified for encoding. The

higher the bit rate, the higher the sound quality, but also the larger

the files.

Sampling rate

This value shows how many times per second the data is sampled

(recorded). For example, music CDs use a sampling rate of 44.1 kHz,

so the sound is sampled (recorded) 44,100 times per second. The

higher the sampling rate, the higher the sound quality, but also the

larger the volume of data.

Encoding

Converting music CDs, WAVE (AIFF) files, and other sound files into

the specified audio compression format.

Tag

Song information such as track titles, artist names, album names,

etc., written into MP3/WMA files.

Root folder

The root folder (or root directory) is found at the top of the file

system. The root folder contains all folders and files. It is created

automatically for all burned discs.

Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,

16 kHz, 12 kHz, 11.025 kHz, 8 kHz

Bit rates 8 - 320 kbps

Sampling rates: 48 kHz, 44.1 kHz, 32 kHz

Bit rates:64 - 160 kbps

Under the ISO9660standard, there are some restrictions to

remember.

Themaximumnested folder depth is 8 (including the root

directory). Thenumber of charactersfor a folder/filename is

limited.

Valid characters for folder/file names are letters A-Z, a-z,

numbers 0-9 and symbols.

Terminology

Root folder

Folder MP3/WMA File

Playback

1

Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically, and the

“ DISC IN” indicator lights up .

When a disc isalready inserted, press SOURCE/ to

switch to the DISCmode.

The mode will change every time the button is pressed.

RADIO CD

*1

USB

*2 AUX RADIO

*1Displayed only when a disc has been inserted.

*2 Displayed only when USB memory is connected.

2

While playingback MP3/WMA, pressor

to select the desired folder.

3

Press or to select the desired track (file).

Returning to the beginning of the current track (file):

Press .

Fast backward:

Press and hold .

Advancing to the beginning of the next track (file):

Press .

Fast forward:

Press and hold .

4

To pause playback, press

BAND/ /

.

Pressing BAND// againwill resume playback.

5

To eject the disc, press .

•Do not remove a CD during its eject cycle. Do not load more than

one disc at a time. A malfunction may result from doing either.

•The “DISC IN” indicator lights up when a disc is inserted.

•Three-inch (8 cm) CDs cannot be used.

•The CD-player can play discs containing audio data, MP3 data,

and WMA data.

•WMA format files that are protected by DRM (Digital Rights

Management).

•The track display for MP3/WMA data playback is the file

numbers recorded on the disc.

•The playback time may not be correctly displayed when a VBR

(Variable Bit Rate) recorded file is played back.

MP3/WMA Play Display

The folder number and file number will bedisplayed as

described below.

•Press VIEW to switch the display. See “Displaying the Text” for

information about display switching.

Repeat Play

Press6(RPT) to repeatedly play back the current track.

The “RPT” indicator lights up, and the track (file) will be

played repeatedly.

Press 6(RPT)again to cancel.

Folder RepeatPlay(MP3/WMA)

Press and hold 6(RPT) for at least 2 seconds.

The “ FOLDER” and “ RPT” indicators appear in the

display, and only files in the current folder are repeatedly played

back.

Press and hold 6(RPT) again to cancel.

CD/MP3/WMA

6(RPT)

SOURCE/

BAND/ /

5(SCAN)

4(M.I.X.)

003–002

Folder number

display

File number

display

ListeningtoRadio

1

PressSOURCE/ to select RADIO mode.

2

Press

BAND/ /

repeatedly until the desired radio

band is displayed.

FM1 FM2 FM3 AM FM1

3

Press or to tune in the desired station.

Press and hold or for at least 0.5 seconds to seek

station.

PresettingStationsManually

1

Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

2

Pressand hold, for at least 2 seconds, any one ofthe

presetbuttons(1through 6) into which you wish

to store the station.

The selected station is stored.

The display shows the band, preset number and station

frequency memorized.

•A total of 24 stations can be stored in the preset memory (6 stations

for each band; FM1, FM2, FM3 and AM).

•If you store a station in a preset memory which already has a station,

the current station will be cleared and replaced with the new station.

Presetting StationsAutomatically

1

Press

BAND/ /

repeatedly until the desired radio

band is displayed.

2

Press and hold A.ME for at least 2 seconds.

The frequency on the display continues to change while the

automatic memory is in progress. The tuner will

automatically seek and store 6 strong stations in the

selected band. They will be stored into preset buttons 1 to 6

in order of signal strength.

•If no stations are stored, the tuner will return to the original station

you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1

Press

BAND/ /

repeatedly until the desired band

is displayed.

2

Press any one of the station presetbuttons

(1through 6) that has your desired radio station in

memory.

Thedisplayshows the band, preset number and frequency

of the stationselected.

Radio

BAND/ /

A.ME

Preset buttons

(1 through 6)

SOURCE/

may result in malfunction.

Accessory List

•Head unit ...................................................................1

•Power cable...............................................................1

•Mounting sleeve.........................................................1

•Carryingcase.............................................................1

•Bracket key................................................................2

•Rubber Cap ...............................................................1

•Bolt Stud ...................................................................1

•Owner’s Manual ........................................................1 set

TurningPower On and Off

Press SOURCE/ to turnon theunit.

•The first time power is turned on, the volume will start from level 18.

Press and holdSOURCE/ for at least 2 seconds to

turn off the unit.

Detaching and Attaching the Front Panel

Detaching

1

Turn off the unit power.

2

Press(Release)at the upper right side until the

front panel pops out.

3

Grasp the right side of the front panel and pull it out.

•The front panel may become hot in normal usage (especially the

connector terminals on the back of the front panel). This is not a

malfunction.

•To protect the front panel, place it in the supplied carrying case.

•When detaching the front panel, do not apply excessive force as it

Attaching

1

Insert the left side of the front panel into the main

unit. Alignthe groove on the front panel with the

projections on the main unit.

2

Push the right side of the front panel until it locks

firmly into themain unit.

•Before attaching the front panel, make sure that there is no dirt or

dust on the connector terminals and no foreign object between the

front panel and the main unit.

•Attach the front panel carefully, holding the sides of the front panel to

avoid pushing buttons by mistake.

Adjusting Volume

Turn the Rotary encoder until the desired sound is

obtained.

Adjusting Volume : 0 ~ 40

Setting Time

1

Press and hold VIEW for at least 2 seconds.

The hourindicationwill blink.

2

Press or to adjust the hours while the

time indication is blinking.

3

When the hour has been adjusted, pressVIEW.

The Minute indication will blink.

4

Press or to adjust the minutes while the

time indication is blinking.

5

When the minute has been adjusted, press VIEW.

The setting time modeiscompleted.

•

Hold down or to change numbers rapidly.

Getting Started

VIEW

SOURCE/ Rotary encoder

Controllable with Remote Control

Thisunit can be controlled withan optional Alpine

remotecontrol. For details, consult your Alpine dealer.

Pointthe optional remotecontrol transmitteratthe

remote-control sensor.

Remote control sensor

Operating Instructions

DONOTOPERATEANYFUNCTIONTHAT TAKES YOUR

ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be

performed after coming to a completestop. Alwaysstop the vehicle

in a safe location before performing these functions. Failure to do

so may result inanaccident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL

HEAR OUTSIDE NOISES WHILE DRIVING.

Excessive volume levelsthat obscure soundssuchas emergency

vehiclesirens or road warning signals (train crossings, etc.) canbe

dangerousand may result inanaccident. LISTENING AT LOUD

VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING

DAMAGE.

MINIMIZE DISPLAY VIEWINGWHILE DRIVING.

Viewing the display may distract the driver from looking ahead of

the vehicleand cause an accident.

DONOT DISASSEMBLEOR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may

result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE

REACH OFCHILDREN.

Swallowing them may result in serious injury. If swallowed,

consult a physician immediately.

USE THE CORRECT AMPERE RATINGWHEN REPLACING

FUSES.

Failure to do so may result in fire or electric shock.

DONOTBLOCKVENTSOR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THISPRODUCTFORMOBILE12VAPPLICATIONS.

Use for other than its designed application may result in fire,

electric shock or other injury.

DONOTPLACE HANDS,FINGERSORFOREIGNOBJECTS IN

INSERTION SLOTS ORGAPS.

Doing so may result in personal injury or damage to the product.

HALT USEIMMEDIATELY IF A PROBLEMAPPEARS.

Failure to do so may cause personal injury or damage to the

product. Return it to your authorized Alpine dealer or thenearest

AlpineService Centre for repairing.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more

severe stains, please dampenthecloth with wateronly. Anything

elsehasthechance of dissolving the paint or damagingthe plastic.

Temperature

Be sure the temperature inside the vehicle is between+55°C

(+131°F) and –10°C (+14°F) before turning your unit on.

Moisture Condensation

You may noticethe CD playback sound wavering due to

condensation. If this happens, remove thedisc from theplayer and

wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing

a bad disc could severelydamage the playback mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself.

Return it to your Alpine dealer or the nearest Alpine Service

Station for servicing.

WARNING

WARNING

This symbol means important instructions.

Failure to heed them can result in seriousinjury

ordeath.

CAUTION

This symbolmeans important instructions.

Failure to heedthem can resultininjury or

material property damage.

EN

12345

678910

MP3/*WMA/CD Receiver

CDE-110/CDE-110C

CDE-110E/CDE-110UB

ALPINE ELECTRONICS OF ASIA PACIFIC CO.,LTD.

555 Rasa Tower 1, Unit 2601-2602, 26th Floor,

Phaholyothin Road, Chatuchak, Chatuchak, Bangkok 10900, Thailand

Phone 02-937-0505

www.alpine-asia.com

R

•OWNER’S MANUAL

Please read before using this equipment.

recorded under unstable conditions, CDs on which a recording

failedor a re-recording was attempted,copy-protectedCDs

which do not conform to the audio CD industry standard.

•Use discs with MP3/WMA files written in a format

compatible with this unit. For details, see “About MP3/WMA”.

•ROM data other than audio files contained in a disc will not

producesound whenplayedback.

Protecting the USB connection terminal

•Only a USB memory can beconnected to theUSBconnection

terminal on this unit. Correct performance using other USB

productscannot be guaranteed. A USB hubisnot supported.

•Do not connect a USB memory over 20mm wide. Also, avoid

connecting USB memory and Front Aux at the same time.

•If a USB device is inserted in the unit, it projects out and may be

a danger while driving. Use a commercially available USB

standard extensioncable, and connect it in a safeway.

•Depending on the connected USB memory device, the unit may

not function or some functions may not be performed.

•The audio file format thatcan be played back on the unit is

MP3/WMA.

•Artist/song name, etc., can be displayed, however characters

may not be correctly displayed.

Change SOURCE to something other than USB, then remove the

USB device to prevent possible damage to its memory.

•Windows Media and the Windows logo are trademarks, or

registered trademarks of Microsoft Corporation in the United

States and/or othercountries.

•“MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.”

•“Supply of thisproduct onlyconveysa licensefor private,

non-commercial use anddoes not convey a license nor imply

anyright to use this productin anycommercial (i.e.revenue-

generation) real time broadcasting (terrestrial, satellite, cable

and/or any other media), broadcasting/streaming via internet,

intranetsand/orother networksorin otherelectronic content

distribution systems, such aspay-audio or audio-on-demand

applications. An independent license for such use is required.

For details, please visit http://www. mp3licensing.com”

On handling CompactDiscs (CD/CD-R/CD-RW)

•Do not touch thesurface.

•Do not expose the disc to direct sunlight.

•Do not affix stickers or labels.

•Clean the discwhen it is dusty.

•Make sure that there are no bumps around the disc.

•Do not usecommercially available discaccessories.

Do not leave the disc in the car or the unit for a long time. Never

expose the disctodirect sunlight. Heat and humidity may damage

the CD and you may not be able to play it again.

To customers using CD-R/CD-RW

•If a CD-R/CD-RW cannot be played back, make sure the last

recording session was closed (finalized).

•Finalize the CD-R/CD-RW if necessary, and attempt playback

again.

About media that can be played

Use only compact discs with the label side showing the CD logo

marks below.

If you use unspecified compact discs, correct performancecannot

be guaranteed.

You can playCD-Rs (CD-Recordables)/CD-RWs (CD-

ReWritables) which have been recorded only on audio devices.

You can alsoplay CD-Rs/CD-RWs containing MP3/WMA

formattedaudio files.

•Some of the following CDs may not play on this unit:

FlawedCDs, CDs with fingerprints, CDs exposed to extreme

temperatures or sunlight (e.g., left in the car or this unit), CDs

On Handling USB Memory

•To prevent malfunction or damage, note the following points.

Readthe USBmemory Owner’s Manual thoroughly.

Do not touch the terminals by hand or metal.

Do not subject USB memory to excessive shock.

Do not bend, drop, disassemble, modify or soak in the water.

•Avoidusageor storage in the following locations:

Anywhere in the car exposed to direct sunlight or high

temperatures.

Anywhere the possibility of high humidity or corrosive

substances are present.

•Fix the USB memory in a location where driver operation will

not be hindered.

•

USB memory may not function correctly at high or low temperature

•

The USB flash memory supports a maximum of 4 GB per partition.

The unit recognizes only one partition.

•

Use only certified USB memory. Note that even certified USB

memory, may not function correctly depending on its type or state.

•USB memory function is not guaranteed. Use USB memory

according to thetermsof agreement.

•Depending on the settings of the USB memory type, memory

state or encoding software, the unit may not play back or display

properly.

•A file thatiscopy-protected(copyrightprotection) cannot be

playedback.

•USB memory may take time to start playback. If there is a

particular file other than audio in the USB memory, it may take

considerable time beforethe fileisplayed backorsearched.

•The unit can playback “mp3”,“wma” or “m4a” file extensions.

•

Do not add the above extensions to a file other than audio data.

This non-audiodata will not berecognised. The resulting playback

maycontainnoise that can damage speakers and/or amplifiers.

•

It is recommended to back up important data on a personal computer.

•Donot remove the USB device while playback is in progress.

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data, etc.

is lost while using this product.

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the

player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is

off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not

attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc.

Playing a disc while driving on a very bumpy road may result in

skips, but this will not scratch the disc or damage the player.

NewDiscs

To prevent the CD from jamming, the LCD is displayed as error if

discs withirregular surfaces are inserted or if discs are inserted

incorrectly. When a new discis ejected immediately after initial

loading, use your finger to feel around the inside of the centre hole

and outsideedge of the disc. If you feel any small bumps or

irregularities, this could inhibit proper loading of the disc. To

remove the bumps, rub the inside edge of the hole and outside edge

of the disc with a ballpoint pen or other such instrument, then insert

the disc again.

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use

any special shapediscs.

Use of specialshape discs may cause damage to themechanism.

Installation Location

Make sure this unit will not be installed in a location subjected to:

•Direct sun and heat

•High humidity and water

•Excessive dust

•Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not

leave fingerprints on the surface. Do not affix tape, paper, or

gummed labels to the disc. Do not write on the disc.

Disc Cleaning

Fingerprints, dust,orsoil on the surface of the disc could cause the

CD player to skip. For routinecleaning, wipe the playing surface

with a clean, soft cloth from the centre of the disc to theouter edge.

If thesurfaceis heavily soiled, dampen a clean, softcloth in a

solution of mild neutral detergent before cleaning the disc.

Disc Accessories

Therearevarious accessories available on the market for protecting

the disc surface and improvingsound quality. However, most of

themwill influence the thicknessand/or diameter of the disc. Using

suchaccessoriescan cause the disc to beout of standard

specifications and may create operational problems. We

recommend not using theseaccessories on discs played in Alpine

CD players.

Centre Hole

Bumps

Centre Hole

New Disc

Outside

(Bumps)

CORRECT

INCORRECT CORRECT

Transparent SheetDisc Stabilizer

M.I.X.(Random Play)

Press 4(M.I.X.) in the play mode.

The “ M.I.X.” indicator lights up, and the tracks (files) on the

disc will be playedback in random sequence.

Press 4(M.I.X.) again to cancel.

Folder M.I.X.(RandomPlay)(MP3/

WMA)

Press and hold 4(M.I.X.) for at least 2 seconds.

The “ FOLDER” and “ M.I.X.” indicators appearin the

display, and all files in the current folder are played back in

random sequence.

Press and hold 4(M.I.X.) again to cancel.

ScanningPrograms

Press 5(SCAN) to activate the scan mode.

The first 10 seconds ofeach track (file)will be playedback in

succession.

Press 5(SCAN) again to cancel.

Folder Scanning Programs(MP3/WMA)

Press and hold5(SCAN) for at least 2 seconds.

From the next folder, the first 10seconds of the first file in each

folder is playedback in sequence.

Press and hold 5(SCAN) again to cancel.

AboutMP3/WMA

What is MP3?

MP3,whose official nameis“MPEG-1Audio Layer 3,” is a

compressionstandard prescribed by the ISO, the International

StandardizationOrganization and MPEG which is a joint activity

institutionofthe IEC.

MP3 filescontain compressed audio data. MP3 encoding is

capableofcompressing audio data at extremely high ratios,

reducing thesizeofmusic files to as much as one-tenththeir

original size.This isachieved while still maintaining near CD

quality. The MP3 format realisessuch high compression ratios

by eliminating thesounds that are either inaudible to the human

ear or masked by other sounds.

What is WMA?

WMA,or“WindowsMedia™ Audio,” is compressed audio data.

WMA is similarto MP3 audio data and can achieve CD quality

sound with small file sizes.

Method for creating MP3/WMA files

Audio data is compressed using software with MP3/WMA

codecs. Fordetails on creating MP3/WMA files, refer tothe

user’s manual forthatsoftware.

MP3/WMA filesthat are playable on this devicehave the

file extensions “mp3” / “wma” Files with no extension

cannot be played back (WMA ver. 7-9 are supported). Protected

files are not supported.

CAUTION

Except for private use, duplicating audio data (including

MP3/WMA data) or distributing, transferring, or copying it,

whether for free or for a fee, without permission of the copyright

holder is strictly prohibited by the Copyright Act and by

international treaty.

Displaying the Text

Text information, such as the disc name and the track name, will be

displayed if playing a CD text compatible disc. It is also possible to

display the folder name, the file name and the tag, etc., while playing

MP3/WMA files.

Press VIEW.

The display will change every time the button is pressed.

•To scroll text, press 3(SCROLL).

The display in Radio mode:

FREQUENCY CLOCK FREQUENCY

The display in CD mode:

TRACK NO./ELAPSED TIME TEXT(DISC NAME)

*1 TEXT

(TRACK NAME)

*1

CLOCK TRACK NO./ELAPSED TIME

The display in MP3/WMA mode:

FOLDER NO./FILE NO. ELAPSED TIME FOLDER NAME

FILE NAME ALBUM NAME

*2

SONG NAME

*2/ARTIST

NAME* 2

CLOCK FOLDER NO./FILE NO.

The display in AUX mode:

AUX IN CLOCK AUX IN

*1Displayed during playback of a disc with CD text.

*2ID3 tag/WMA tag

If an MP3/WMA file contains ID3 tag/WMA tag information,

the ID3 tag/WMA tag information is displayed (e.g., song name,

artist name, and album name). All other tag data is ignored.

About “Text”

Text:

Textcompatible CDs contain text information such as the disc

nameand track name. Such text information is referred to as

“text.”

•Some characters may not be displayed correctly with this device,

depending on the character type.

•“NO TEXT” is displayed if text information cannot be displayed on

this unit.

•The text or tag information may not be correctly displayed,

depending on the contents.

Displaying Time

PressVIEW repeatedly until the time is displayed.

Each press changes thedisplay.

For details, see “Displaying the Text”.

•Selecting any radio or CD function while in the clock priority mode

will interrupt the time display momentarily. The function selected

will be displayed for about 5 seconds before the time returns to the

display.

Using the Front AUX Input Terminal

Connect a portable music player, etc. by simply connecting it to the

input on the front panel. An optional adapter cable is required (standard

RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).

PressSOURCE/, and select the AUX mode to listen to

the portable device.

RADIO CD

*1

USB

*2

AUX RADIO

*1Displayed only when a disc has been inserted.

*2 Displayed only when USB memory is connected.

Other Functions

VIEW

SOURCE/

3(SCROLL)

Portable player, etc.Main unit

Optional adapter cable(RCA pin

plugs [red, white] 3.5ø miniplugs)

or (3.5ø miniplugs)

or

Note

*CDE-110UB does not support WMA.

Note

*CDE-110UB does not support WMA.

ALPINE ELECTRONICS MARKETING, INC.

1-1-8 Nishi Gotanda,

Shinagawa-ku,

Tokyo 141-0031, Japan

Phone 03-5496-8231

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

777 Supertest Road, Toronto,

Ontario M3J 2M9, Canada

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

161-165 Princes Highway, Hallam

Victoria 3803, Australia

Phone 03-8787-1200

ALPINE ELECTRONICS GmbH

Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany

Phone 089-32 42 640

ALPINE ELECTRONICS OF U.K. LTD.

Alpine House

Fletchamstead Highway, Coventry CV4 9TW, U.K.

Phone 0870-33 33 763

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

B.P. 50016, 95945 Roissy Charles de Gaulle

Cedex, France

Phone 01-48638989

ALPINE ITALIA S.p.A.

Viale C. Colombo 8, 20090 Trezzano

Sul Naviglio (MI), Italy

Phone 02-484781

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava)-APDO 133, Spain

Phone 945-283588

ALPINE ELECTRONICS (BENELUX) GmbH

Leuvensesteenweg 510-B6,

1930 Zaventem, Belgium

Phone 02-725-13 15

*CDE-110UB does not support WMA

Produktspezifikationen