Alpine KIT-W997SMTB Bedienungsanleitung

Lies die bedienungsanleitung für Alpine KIT-W997SMTB (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 8 Bewertungen. Hast du eine Frage zu Alpine KIT-W997SMTB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

IF IN THE VEHICLE SETTINGS THERE ISN'T THE

CHANGE TIME MENU,

AND YOU WANT TO SET THE VEHICLECLOCK?

PLEASE FOLLOW THE PROCEDURE BELOW:

4

Steering wheel remote control

interface installation kit for:

SMART

Model:For Two / For Four

Year: 2012 >

Kit content:SWRC CAN Bus interface

wiring harness

antenna adapter

radio adapter

All installation work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

06/2020 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.

ATTENTION: CHANGE TIME MENU

- The vehicle must be stationary with the handbrake on

- Turn on and off the vehicle (Key in pos. n°2) for three times;

- Use "volume +" to increase the hours

- Use "Volume -" to increase the minutes

- Use "Voice" to change 12h/24h format

To exit the menu, switch off the

car for at least 5 sec.

NOTE:

When turning on the car, the clock's hands automatically reach the

correct time.

Please note that the clock can have a variation of roughly 1 minute per

month.

All installation work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

06/2020 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.

INSTALLATION MANUAL

Produktspezifikationen