American Audio Deco FX Bedienungsanleitung
American Audio
Nicht kategorisiert
Deco FX
Lies die bedienungsanleitung für American Audio Deco FX (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu American Audio Deco FX oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
User Instructions
© ®American DJ - www.americandj.com - Deco FX™ Instruction Manual Page 2
Unpacking: Thank you for purchasing the Deco FX™ by American
DJ . Every Deco FX™ has been thoroughly tested and has been shipped ®
in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your unit for any damage and be sure
all equipment necessary to operate the unit has arrived intact. In the
event damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Please
do not return the unit to your dealer without rst contacting customer
support.
Introduction: Thank you for purchasing the American DJ Deco ®
FX™. The Deco FX™ uses 8 textured glass gobos to make a colorful
art deco effect. The unit has 3-way mode switch that allows the unit to
be operated in three different modes (see page 5 for operating modes).
To optimize beam intensity use this xture with a fog machine or other
type of special effect smoke.
Customer Support: American DJ provides a toll free customer sup-®
port line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. For service related issue please contact Ameri-
can DJ . Service Hours are Monday through Friday 9:00 a.m. to 5:00 ®
p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ.
PLEASE recycle the shipping carton whenever possible.
Deco FX™ General Introduction
American DJ ®
4295 Charter Street
Los Angeles, CA. 90058
www.americandj.com
5/07
American DJ®
DECO FX
© ®American DJ - www.americandj.com - Deco FX™ Instruction Manual Page 4© ®American DJ - www.americandj.com - Deco FX™ Instruction Manual Page 3
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
Deco FX™ General Instructions Deco FX™ Precautions
Deco FX™ Warranty Registration
The Deco FX™ carries a one year (365 days) limited warranty. Please
fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. If the
unit is under warranty you must provide a copy of your proof of pur-
chase invoice. Please contact American DJ customer support for a ®
R.A. number.
Safety Issues: This unit may blow the fuse if the maximum allotted load
of 5 amps is reached. If the fuse needs replacement, always replace the
fuse with same exact type that was remove, unless otherwise instructed
by an authorized American DJ service technician. Use of a different type ®
fuse from that which is recommended may cause fire or electric shock
and will void the manufactures warranty.
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been frayed
or broken
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short
• Disconnect from main power before making any type of connection
• Do not remove the cover under any conditions. There are no user
serviceable parts inside
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
• Do not attempt to operate this unit, if it becomes damaged
• This unit is intended for indoor use only, use of this product outdoors
voids all warranties
• During long periods of non-use, disconnect the unit’s main power
• Always mount this unit in safe and stable matter
• Power cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 3 for cleaning details
• Heat -The appliance should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal lenses should be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec-
ommend cleaning on a monthly basis. Periodic cleaning will ensure
longevity, and crisp beam output.
Deco FX™ Cleaning
© ®American DJ - www.americandj.com - Deco FX™ Instruction Manual Page 5 American DJ - www.americandj.com - Deco FX™ Instruction Manual Page 6© ®
Deco FX™ Fuse & Lamp Replacement Deco FX™ Operation
Power Supply: Before plugging your unit in, be sure the source
voltage in your area matches the required voltage for your American
DJ Deco FX™ before attempting operation. ®
General Operation: Just plug this light in, and watch it go. This fix-
ture is designed to operate as a stand alone unit. It has been tested
and the lamp has been installed at the factory there is no assembly
necessary. The Deco FX™ is ready to be plugged in, out of the box.
There is no power switch, after plugging in the unit the lamp should
turn on, and unit will begin to function. If there is no lamp output
check the fuse and bulb. If the fuse and bulb are good, please return
the unit for servicing.
Operating Modes:
This unit comes with a 3-way multi-operating switch located on the
bottom of the unit. The switch controls three (3) different operating
modes; Static, Sound Active, and Auto.
Switch in the "I" auto position: Mode 1 - In this mode the mirror dish
and textured glass wheell will spin continuously in one direction,
regardless of the presence of sound.
Switch in the “0” satic position: Mode 2 - In this mode the textured
glass wheel will continuously rotate while the mirror dish will remain
static. In this mode the unit may be used as a rotating-gobo projec-
tor.
Switch in the “II” sound position: Mode 3 - In the this mode the tex-
tured glass wheel will continuously rotate in one direction while the
mirror dish will react to sound. Please note that tapping on the unit,
or high pitched sounds may not trigger the unit, the unit is designed
to react to low frequencies (bass). Also note that the music sensitivity
is preset at the factory and may not be changed or adjusted.
Focusing:
The unit has a fully focusing lens. The lens is focused by manually
turning the knob located on the top front, in either a clockwise or
counter-clockwise direction.
Caution: Always replace with the exact same type lamp and fuse,
unless otherwise specified by an authorized American DJ techni-®
cian. Replace with anything other than the specified part can damage
your unit and will void your manufactures warranty.
Warning: If after you have replaced the lamp or the fuse and you
continue to blow either one, STOP using the unit. Contact customer
support for further instructions, you may have to return the unit for
servicing. Continuing to use the unit may cause serious damage.
Fuse Replacement: First unplug the power. The fuse holder
is located next to the power cord. Using a flat-head screw driver
unscrew the fuse holder. Remove the bad fuse and replace with a
new one.
Lamp Replacement: Caution! Never open the unit when in use.
Always disconnect the main power and allow the fixture ample time
to cool before attempting to replace the lamp. Lamp replacement has
been made simple by incorporating a split dome that is retained by
thumb screws. Again, please remember to always replace with the
exact same type lamp.
1. Be sure to follow the proper procedures when handling halogen
lamps. Never touch the new lamp with your bare fingers.
2. Unscrew the single phillips screw located at the bottom front of
the unit. It will say “Lamp Access”.
3. Once the screw has been removed, pull the lamp assembly
cover plate up to expose the lamp.
4. Remove and replace the lamp with an exact match.
5. Reassemble in reverse order.
Halogen Lamp Warning! This fixture is fitted with
halogen lamps which are highly susceptible to
damage if improperly handled. Never touch the
lamps with your bare fingers as the oil from your
hands will shorten lamp life. Also, never move the
fixture until the lamps have had ample time to cool.
Remember, lamps are not covered under warranty
conditions.
Produktspezifikationen
| Marke: | American Audio |
| Kategorie: | Nicht kategorisiert |
| Modell: | Deco FX |
Brauchst du Hilfe?
Wenn Sie Hilfe mit American Audio Deco FX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert American Audio
16 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
Bedienungsanleitung Nicht kategorisiert
- Sanitas
- Holland Electronics
- Söll
- MADE
- Emeril Everyday
- IVT
- Parkside
- Speck
- Phoenix Gold
- Beeletix
- Videon
- Pioneer
- Telex
- Grotime
- Deltana
Neueste Bedienungsanleitung für -Kategorien-
16 August 2025
16 August 2025
16 August 2025
16 August 2025
16 August 2025
16 August 2025
16 August 2025
16 August 2025
16 August 2025
16 August 2025