American Standard Priolo FloWise 3695.001 Bedienungsanleitung

Lies die bedienungsanleitung für American Standard Priolo FloWise 3695.001 (2 Seiten) kostenlos online; sie gehört zur Kategorie Toilette. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu American Standard Priolo FloWise 3695.001 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SAVE FOR FUTURE USE

2

1

7301198-100

Product names listed herein are trademarks of AS America, Inc.

© AS America, Inc. 2008

NEOPRENE

SEAL

SEALANT

INSTALL NEOPRENE OR GRAPHITE FELT SEAL*

Install seal evenly around waste flange (horn).

Apply a thin bead of sealant around base flange.

*NOTE: Wax seal not recommended for this application.

RECOMMENDED TOOLS AND MATERIALS

Putty Knife Regular Screwdriver Adjustable Wrench Sealant Tape Measure

Hacksaw Wax Ring/Gasket Flexible Supply Tube Closet Bolts Carpenters Level

CAUTION: PRODUCT IS FRAGILE. TWO PEOPLE ARE RECOMMENDED FOR HANDLING

TO AVOID BREAKAGE AND POSSIBLE INJURY!

NOTE:Pictures may not exactly define contour of china and components.

NOTE:For proper operation these products require a minimum of 30 psi line pressure.

PRIOLO FLOOR MOUNT BACK OUTLET

ADA FLUSHOMETER ONE PIECE TOILET

INSTALLATION

INSTRUCTIONS

Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is

installed properly, please read these instructions carefully before you begin. (Certain installations may require professional

help.) Also be sure your installation conforms to local codes.

!

730mm

(28-3/4)

121mm

(4-3/4)

240mm

(9-1/2)

152mm

(6)

102mm

(4)

419mm

(16-1/2)

470mm

(18-1/2)

356mm

(14)

13mm

(1/2)

345mm

(13-5/8)

646mm

(25-3/8)

60mm

(2-3/8)

136mm

(5-3/8)

752mm

(29-5/8)

C/L OF SEAT POST HOLES

140mm (5-1/2) CENTERS

FINISHED WALL

1" N.P.T. OR 1" C.W.T. SUPPLY

TO FLUSH VALVE

(SUGGESTED)

C/L OF 1/2”

DIA. HOLES

1-1/2

SPUD

FINISHED

FLOOR

13 x 25mm

slots

(1/2 x 1")

102mm

(4)

C/L OF

WASTE

OUTLET

PRIOLO 3695/3696 16-1/2" TOP SPUD

PRIOLO 3697/3698 16-1/2" BACK SPUD

DIMENSIONS (Nominal) NOTE: Distance from floor to closet flange centerline (rough-in)

must be 4" (102 mm) with flange surface flush to 1/16" (1.6mm) max. beyond finished wall.

240mm

(9-1/2)

419mm

(16-1/2)

438mm

(17-1/4)

356mm

(14)

470mm

(18-1/2)

217mm

(8-1/2)

102mm

(4)

112mm

(4-3/8)

752mm

(29-5/8)

C/L OF SEAT POST HOLES

140mm (5-1/2) CENTERS

FINISHED WALL

C/L OF

WASTE

OUTLET

217mm

(8-1/2)

152mm

(6)

102mm

(4)

FINISHED

FLOOR

13mm

(1/2)

13 x 25mm

slots

(1/2 x 1")

345mm

(13-5/8)

646mm

(25-3/8)

C/L OF 1/2”

DIA. HOLES

1.6 GPF Models 3695.016, 3696.016, 3697.016, 3698.016

1.28 GPF Models 3695.128, 3696.128, 3697.128, 3698.128

HET

High Efficiency

(1.28gpf/4.8Lpf)

34

FLUSH TO

1/16" (1.6mm)

EXPOSED

CLOSET

FLANGE

CLOSET

BOLTS

168mm

(6-5/8)

PILOT

HOLES

102mm

(4)

345mm

(13-5/8)

Install closet bolts in flange channel, turn

90°, and slide into place 6" (152 mm)

apart and parallel to floor. (Use putty to

hold bolts in place if necessary.) Brace

under flooring as needed and drill two

mounting pilot holes as shown.

a. Close flush valve completely.

b. NOTE: If replacing valve, first shut off main water supply!

c. Remove old mounting hardware, remove toilet and plug wall waste opening to prevent escaping sewer gases.

d. Remove closet bolts from flange and clean away old wax, putty, etc.  base area.

NOTE: Mounting surface must be clean and perpendicular to the floor before new toilet is installed!

REMOVE OLD TOILET

INSTALL CLOSET BOLTS

Produktspezifikationen