AMX CBL-DP-FL2 Bedienungsanleitung

Lies die bedienungsanleitung für AMX CBL-DP-FL2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 8 Bewertungen. Hast du eine Frage zu AMX CBL-DP-FL2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

QUICK START GUIDE

CBL-x-FL2-16Flat Cables

Overview

Flat cables benefits include weight reduction, space efficiency, flexibility and strength.

AMX flat cables feature MyTurn Ready Over-mold connector ends. With the addition of a

MyTurn™ Source Selection Button (FG554-21) that clips into the specially designed

groove built into the connector housing, participants can switch their content to the

display at the press of a button without moving from their seat.

The MyTurn Source Selection Button communicates with a MyTurn Source Selector

Receiver (FG554-23) which connects to a Solecis digital switcher, AMX master

controller (with I/O), or DVX all-in-one presentation switcher. Any MyTurn-Ready cable

may be equipped with the MyTurn solution.

HDMI 4K60 MyTurn-Ready Flat Cable

The HDMIdirectional cables (CBL-HDMI-FL2-xx)are available in 16 and 32 ft lengths.

The end labeled Displayconnects to the display device (example: HDTV monitor) and

has a built-in lock-down screw. The source end of the cable is not labeled (FIG.1): .

HDMI Directional Cable Notes

•Avoid using an extension cable on either end of the HDMI cables without using

AMX Powered HDMI 2.0 Cable Extender (FG558-21).

•Connecting the cable backwards, with the connector labeled "DISPLAY" into the

video source, will not damage the equipment. However when incorrectly installed,

the cable will not transmit a signal.

Cat6 Ethernet Flat Cable

The MyTurn-Ready Cat6 Ethernet cable (CBL-ETH-FL2-16) with integrated strain relief

(not MyTurn Ready) is 16 ft with a flat cable design

.Cat6 features more stringent

specifications for crosstalk and system noise, plus performance of up to 250 MHz

(suitable for 10/100/1000Base-T/TX and 10GBase-T).

DisplayPort 4K60 MyTurn-Ready Flat Cable

The DisplayPort to DisplayPort (DP-DP)

cable (

CBL-DP-FL2-16

) is

directional

and includes

an additional DP-HDMI adapter

.

The connector labeled Displaymust be connected to the

display device (example: HDTV monitor). The source end of the cable is not labeled

(FIG.3)

: .

Mini DisplayPort 4K60 MyTurn-Ready Flat Cable

The Mini DisplayPort to DisplayPort

(mDP-DP) cable (

CBL-MDP-FL2-16

) is

directional

and

includes an additional DP-HDMI adapter

.

The DP connector labeled Display must be

connected to the display device (example: HDTV monitor). The mDP source end of the

cable is not labeled

(FIG.4)

:

DP Directional Cable Notes

•Connecting the cable backwards, with the connector labeled "DISPLAY" into the

video source, will not damage the equipment. However when incorrectly installed,

the cable will not transmit a signal.

HDMI Adapter

The DP-DP and mDP-DP cables come with an additional DP-HDMI adapter

(FIG.5)

. It

connects to the Display end of these cables to interface with HDMI ports on some displays or

the AMX HDMI Extender (

FG558-21

).

FIG. 1 HDMI DIRECTIONAL FLAT CABLE

CBL-HDMI-FL2-16/32 CABLE SPECIFICATIONS

FG#:•FG10-2192-16 - 16ft (5m)

•FG10-2192-32 - 32ft (10M)

Cable Length•16.4 ft or 32 ft (5m or 9.75m)

Connectors:•SOURCE: HDMI (male) - connects to the source device.

•DISPLAY: HDMI (male) - connects to the display device.

•Molded Strain Relief•MyTurn ready Over-Mold

Data Rate:•18 Gbps

Signal Support: •4K@60Hz

Color: •48 Bits (16 bits per color)

Supported Features:•Deep Color, 3D, HEC, ARC

Plating:•24K Gold

CBL-ETH-FL2-16 CABLE SPECIFICATIONS

FG#:•FG10-2194-16

Cable Length•16.4 ft (5m)

Connectors:•RJ45 (male, both ends)

•Molded Strain Relief

Category:•Cat6

Data Rate:•1000Base-T (Gigabit Ethernet)

Wiring:•26 AWG

•4 twisted pairs

•Single-core

Plating:•24K Gold

FIG. 2 CAT6 ETHERNET FLAT CABLE

Display End

Source End

MyTurn-Ready Over-mold

RJ45

RJ45

Matte Black Cat6 Ethernet Flat Cable

FIG. 3 DP-DP DIRECTIONAL FLAT CABLE

CBL-DP-FL2-16 CABLE SPECIFICATIONS

FG#:•FG10-2193-16 - 4K60 MyTurn Ready Flat Cable

Cable Length•16.4 ft (5m)

Connectors:•SOURCE: DisplayPort (male) - connects to the source device

•DISPLAY: DisplayPort (male) - connects to the display device

•Molded Strain Relief

•MyTurn ready Over-Mold

Data Rate:•18 Gbps

Signal Support: •4K@60Hz

Color: •48 Bits (16 bits per color)

Supported Features:•Deep Color, 3D

Plating:•24K Gold

Included:•DP-HDMI adapter

FIG. 4 MINI DP-DP DIRECTIONAL FLAT CABLE

CBL-MDP-FL2-16 CABLE SPECIFICATIONS

FG#:•FG10-2196-16 - 4K60 MyTurn Ready Flat Cable

Cable Length•16.4 ft (5m)

Connectors:•SOURCE: mDP (male) - connects to the source device

•DISPLAY: DP (male) - connects to the display device

•Molded Strain Relief

•MyTurn ready Over-Mold

Data Rate:•18 Gbps

Signal Support: •4K@60Hz

Color: •48 Bits (16 bits per color)

Supported Features:•Deep Color, 3D

Plating:•24K Gold

Included:•DP-HDMI adapter

FIG. 5 DP-HDMI ADAPTER

MyTurn-Ready Over-mold

Release button

Source End

MyTurn-Ready Over-mold

Source End

Release button

Produktspezifikationen