AMX NXD-700i Bedienungsanleitung

AMX Monitor NXD-700i

Lies die bedienungsanleitung für AMX NXD-700i (2 Seiten) kostenlos online; sie gehört zur Kategorie Monitor. Dieses Handbuch wurde von 44 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 22.5 Bewertungen. Hast du eine Frage zu AMX NXD-700i oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

Installation Guide

NXD-700i

7”Modero

Wall/Flush Mount Touch Panel with Intercom

Overview

The NXD-700i (FG2258-10) is an incredibly versatile user interface, combining a sleek,

compact size, Wall/Flush Mount flexibility and the ability to create a high quality digital home/

office intercom network or to make/receive digital local, long distance and international

telephone calls.

Simply add the AMX SIP Communications Gateway (FG2182-0x) for calls that sound

incredibly clear.

ATTENTION!

Verify you are using the latest NetLinx Master and Modero touch panel firmware (available

from www.amx.com). Verify the TPDesign4 program being used is Version 2.6 or higher, and

download the latest G4 Support Files from www.amx.com.

Specifications

Installing the NXD-700i

Consult the NXD-700i Touch Panels Operation/Reference Guide for the various supported

installation methods and dimensions.

Panel Connectors

FIG. 2 shows the connectors located on the NXD-700i:

• The mini-USB port is used both for programming the touch panel and for audio output.

• The mini-USB port automatically detects the presence of a headphone adaptor,

allowing the port to be used for headphone connectivity.

Note: For more information on connection and use of the Panel Connectors, as well as

information on programming and headphone connectivity, please refer to the NXD-700i

Operation/Reference Guide, available at www.amx.com.

FIG. 1 NXD-700i (shown with Trim Ring 60-2258-26)

NXD-700i Specifications

Dimensions (HWD):

NXD-700i

(Faceplate included)

5.93" x 7.87" x 3.28" (15.06 cm x 20.00 cm x 8.33 cm)

CB-TP7 (optional

Rough-In Box)

5.47" x 7.23" x 3.40" (13.90 cm x 18.40 cm x 8.64 cm)

Power Requirements • PoE Powered - No local power supply needed

• Max power draw: 5.5W

Memory: • 128 MB SDRAM

• 256MB integrated Flash Memory (not upgradeable - factory

programmed)

Weight: 1lb (0.45kg)

Panel LCD

Parameters:

• Aspect ratio: 16 x 9

• Brightness (luminance): 300 cd/m2

• Contrast ratio: 400:1

• Display colors: 256 thousand colors (18-bit color depth)

• Dot/pixel pitch: 0.19 mm

• Panel type: TFT Color Active-Matrix

• Screen Resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency

Active Screen Area: 6.00" x 3.60" (15.24cm x 9.14cm)

Viewing Angle: Up/Down/Left/Right: 70/60/70/70

IR Reception Angle: • Horizontal: + 50° (left and right from center)

• Vertical: +

30° (up and down from center)

Supported Audio

Sample Rates

48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,

11025Hz, and 8000Hz

Intercom Full duplex VoIP capabilities

Video Capabilities: Supports DynaMo™ (M-JPEG), including DynaMo Resource (enhanced

M-JPEG) Images. Refer to the TPDesign4 online help and NXD-700i /

NXT-CA7 Operation/Reference Guide for details on configuring DynaMo

and DynaMo Resource Images.

Front Panel: • Light Sensor: Photosensitive light detector for automatic adjustment

of the panel brightness

• Motion Sensor (PIR): Proximity Infrared Detector to wake the panel

when panel is approached

• Front Bezel Button: Provides both access to the setup and calibration

pages and toggles the panel between “sleep” or “wake” state. This

button is also user-programmable.

• Microphone: Frequency response of 300 to 3400Hz; used for

intercom applications.

• Speaker: Output of 4Ohm, 2 Watt, with a 300Hz low cutoff frequency

Programmable pushbutton/LED

Microphone

Sleep / Setup Access button

Speaker

Programmable pushbutton/LED

Note: Programmable pushbutton/LEDs available only on Trim Ring 60-2258-26

Trim Ring

NXD-700i Specifications (Cont.)

Side Panel Connectors • Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication.

The Ethernet port automatically negotiates the connection speed

(10 Mbps or 100 Mbps), and whether to use half duplex or full duplex

mode.

Power is supplied through Power Over Ethernet (PoE).

NXD-700i panels communicate with the NetLinx Master using the

ICSP protocol over Ethernet.

LEDs show communication activity, connections, speeds, and mode

information:

• L/A- link /activity - Yellow LED lights On when Ethernet cables are

connected and terminated correctly and then blinks when receiving

Ethernet data packets.

• SPD-speed - Green LED lights On when the connection is 100 Mbps

and turns off when the speed is 10 Mbps.

• Mini-USB Connector: 5-pin Mini-USB connector used for

programming, firmware update, and touch panel file transfer between

the PC and the target panel.

The connector is also used for providing audio output for external

speakers.

Operating /Storage

Environments:

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

• Operating Humidity: 20% - 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% - 85% RH

Certifications: • FCC Part 15 Class B and CE

• IEC60950

•RoHS

Included

Accessories:

• Installation Kit for NXD-700i panels (KA2258-02):

- 4 Phillips-head screws (#4-40 x 0.250 Black) (80-0112)

- 3 Drywall clips (62-5924-05)

- 3 #6 sheet metal screws (80-0192)

• Trim Ring with button openings (60-2258-26)

• Trim Ring without button openings (60-2258-25)

Other AMX Equipment: • NXA-RK7 Rack Mount Kit (FG2904-53)

• CB-TP7 Rough-In Box (FG035-10)

• PS-POE-AF PoE Injector (FG423-80)

• CC-USB Type-A to Mini-B5-wire programming cable (FG10-5965)

• USB to Headphone Adaptor (FG5966-23)

• AMX SIP Communications Gateway (FG2182-0x)

FIG. 2 Connector layout on the NXD-700i

Produktspezifikationen

Marke:	AMX
Kategorie:	Monitor
Modell:	NXD-700i
Touchscreen:	Ja
Bildschirmdiagonale:	7 "
Eingebaute Lautsprecher:	Ja
Produktfarbe:	Schwarz
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 85 %
Zertifizierung:	FCC 15 B, CE, IEC 60950, RoHS\r\n
Stromverbrauch (Standardbetrieb):	5.5 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Bildschirmform:	Flach
Helligkeit:	300 cd/m²
Kontrastverhältnis:	400:1
Temperaturbereich bei Lagerung:	-20 - 60 °C
Luftfeuchtigkeit bei Lagerung:	5 - 85 %
Gewicht (ohne Ständer):	450 g
Abmessungen (BxTxH):	200 x 83.3 x 150.6 mm
Seitenverhältnis:	16:9
Wandmontage:	Ja
NVIDIA G-SYNC:	Nein
Pixel Abstand:	0.19 x 0.19 mm
AMD FreeSync:	Nein
Display, sichtbarer Bereich BxH:	152.4 x 91.4 mm
Anzahl der vorgeschalteten Steckplätze:	1
Display-Auflösung:	800 x 480 Pixel