Anton/Bauer HyTRON Bedienungsanleitung
Anton/Bauer
Akku
HyTRON
Lies die bedienungsanleitung für Anton/Bauer HyTRON (9 Seiten) kostenlos online; sie gehört zur Kategorie Akku. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Anton/Bauer HyTRON oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/9
HyTRON®
Nickel Metal Hydride Battery Owner’s Manual
7595 -0424
Revision A
TABLE OF CONTENTS
1 IMPORTANT
INTRODUCTION
2 FEATURES
CHARGING
3 BATTERYDISPLAY
4 OPERATINGGUIDELINES
5 SERVICE
PRECAUTIONS
SPECIFICATIONS
CHARGETIMES
6 WARRANTY
1
IMPORTANT
INTRODUCTION
The development of the HyTRON battery has been made possible
through the incorporation of InterActive technology with the latest
Nickel Metal Hydride (NiMH) cell formulations. HyTRON batteries
feature an on-board “fuel computer” to monitor energy put into and
taken out of the battery, as well as critical operating characteristics
and conditions. This data is communicated to the InterActive charger
to optimize safe and reliable performance.
Remaining battery capacity information is available to the operator
by means of the on-board RealTime® LCD and in the viewnder
of most broadcast and professional camcorders. The patented
interface from the battery to the camera viewnder is factory
standard equipment on most camera/camcorder models from all
major camera manufacturers.
Anton/Bauer InterActive chargers were designed in anticipation of
new cell technologies, so chargers in the eld only require an update
(software or rmware available separately depending on model) to
effectively address new battery systems. This upward and downward
compatibility allows Anton/Bauer to introduce new high performance
cell technologies safely and seamlessly into existing inventories.
The HyTRON battery will automatically identify itself to the InterActive
charger, activating the proper charge routine(s) necessary to
effectively utilize this technology.
READANDUNDERSTANDTHISMANUALBEFOREOPERATION
The HyTRON® Logic Series® battery is designed to be charged
with current InterActive® chargers. Older model InterActive
MP4D, Quad, Lifesaver Dual, ABC800 cannot charge these
batteries.
Do not attempt to charge on non-InterActive chargers or
chargers not manufactured by Anton/Bauer, Inc. Safety
circuits in the battery will prevent charging on any charger,
which cannot properly address the battery communication.
Precautions and handling instructions contained in this manual
should be strictly adhered to for safe and reliable operation.
Contact Anton/Bauer Field Support at (203) 925-4991 or
support@antonbauer.com with any questions regarding this
product.
Produktspezifikationen
| Marke: | Anton/Bauer |
| Kategorie: | Akku |
| Modell: | HyTRON |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Anton/Bauer HyTRON benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Akku Anton/Bauer
22 August 2024
9 Juli 2024
Bedienungsanleitung Akku
- Vonroc
- A-solar
- Genaray
- For_Q
- DeWalt
- Hilti
- Greenworks
- E-flite
- Stihl
- DJI
- Wentronic
- Cobra
- Red Power
- Toolcraft
- Skil
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
6 Oktober 2024
Arris SURFboard Touchstone Battery BPB022S Bedienungsanleitung
29 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
21 September 2024
21 September 2024