Anton/Bauer PowerTap Kit Bedienungsanleitung

Anton/Bauer Anbaustein PowerTap Kit

Lies die bedienungsanleitung für Anton/Bauer PowerTap Kit (6 Seiten) kostenlos online; sie gehört zur Kategorie Anbaustein. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Anton/Bauer PowerTap Kit oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/6

Mobile Power. Perfected.

Department Approvals Date

ENG Mech.

ENG Elec.

Marketing

7595-0060

RevisionG

PowerTap Kit

Installation Instructions

APPROVED

C. v VLIERDEN 12/30/14

M. MRAZIK 12/30/14

D. GALLI 12/15/14

TABLE OF CONTENTS

1 IMPORTANT

WHAT’S INCLUDED

2-3 INSTALLATION INSTRUCTIONS

APPROVED

IMPORTANT

READ AND UNDERSTAND THIS MANUAL BEFORE OPERATION

The Anton/Bauer PowerTap® Connector allows the direction of the

PowerTap Cable to exit from the opposite side of the Connector

Housing, thus providing a more convenient method by which to

dress the PowerTap Cable on specic applications.

IMPORTANT: PLEASE TAKE NOTE OF CABLE POLARITY

Reversing the PowerTap Cable exit location (per instructions

contained in this document) will also reverse the polarity of the

corresponding connector or un-terminated wires. Equipment

damage may be caused if proper cable polarity is not observed.

Use the polarity markings located on the PowerTap Connector

Housing to verify correct equipment cable polarity.

Example: XLR-4 Connector: Pin 1 (-) negative to (+) positive polarity,

Pin 4 (+) positive to (-) negative polarity, OR (+) positive agged wire

to (-) negative polarity

Contact Anton/Bauer Field Support at (203) 925-4991 or

support@antonbauer.com with any questions regarding this product.

WHAT’S INCLUDED

Your purchase of the PowerTap Kit will include the following:

P-TAP FRONT

QTY 1

P-TAP BLANK

QTY 1

P-TAP BACK

QTY 1

2-56 PAN HEAD SCREW

QTY 1

NUT 2-56

QTY 1

STRAIN RELIEF

QTY 1

BANANA PIN

QTY 2

APPROVED

Produktspezifikationen

Marke:	Anton/Bauer
Kategorie:	Anbaustein
Modell:	PowerTap Kit
Produktfarbe:	Schwarz
Stecker:	PowerTap FS4
Kabellänge:	0.35 m
Anzahl der AC-Ausgänge:	- AC-Ausgänge