APart CMR15T Bedienungsanleitung

Lies die bedienungsanleitung für APart CMR15T (1 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu APart CMR15T oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

COLOURKLEURCOULEURPOWER IMPEDANCE

BlackZwartNoir Common

GREENGROENVERT2.5 Watt4 KΩ

WHITEWITBLANC5 Watt2 KΩ

YELLOWGEELJAUNE10 Watt1 KΩ

REDROODROUGE15 Watt0.66 KΩ

• Type : Two-Way HiFi

• Woofer : 4” Coated Paper

• Tweeter : 1” Mylar Dome

• Rated Power RMS : 15 W / 100 Volt

• Music Power RMS : 25 W / 100 Volt

• Rated Power RMS : 30 W / 16 Ω

• Music Power RMS : 60 W / 16 Ω

• Trafo Power Tappings : 15 - 10 – 5

- 2.5W

• Impedance: 16 Ω / 100 Volt

• Dimensions Outside : 147 x 220 mm

• Dimensions Cutout : 118 x 192 mm

• Mounting Depth : 60 mm

• Weight : 1.4 Kg

The APart miniature metal CM speaker is a high quality built-in loudspeaker. It has a

full metal frame and a coated dual paper cone for the lowest distortion and increased

resistance against moisture. It can be used for 100 volt speaker lines as well as low

impedance systems, such as hi, surround or multi room ampliers/receivers.

For 100 volt systems, different power taps are present on the high quality built-in line

transformer: for background music with low background noise, you can use the lower

power taps. For maximum sound pressure level, use the highest power tap. The

APart technology avoids any overload of your amplier by applying the unique IMC

protection device.

For use as a low impedance speaker, you can bypass the transformer and connect

directly to the speaker. Our special impedance of 16 ohms allows you to connect up

to 4 speakers per channel onto a regular amplier than can drive 4 ohms, and 2 – 3

speakers onto an amplier than can drive 6 ohms. The APart technology offers you a

rich, clear and efcient sound, surpassing most of the regular 8 ohm speakers.

1515 151010555+++++++80 Watt=

120Watt Amplier

Amplier power must be higher than total power of all speakers.

Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.

La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.

The speaker is very easy to install, rst connect the speaker wires, then carefully

remove the speaker grille. In every corner you will nd a screw attached to the “dog

ears”. Put the speaker in the mounting hole and tighten the mounting screws until the

speaker is securely fastened. Slide the speaker grille back in place. Finished !

16Ω16Ω 16Ω16Ω16Ω 16Ω16Ω

4Ω 4Ω

16Ω

Please disconnect the 100 Volt transformer for use in low Z applications. Connect the speaker lines on the

speaker directly. All necessary connection hardware is already included and mounted on the speaker.

Gelieve de 100 V transformator bij gebruik in lage Z toepassingen af te koppelen. Koppel de luidsprekerkabels

rechtstreeks op de luidsprekers aan. Alle benodigde verbindingsstukken zijn inbegrepen en reeds op de luidspreker

gemonteerd.

Veuillez déconnecter le transformateur lors d’usage en applications basse-Z. Connectez les cables haut-parleur

directement sur l’haut-parleur. Tout les pièces de connection sont comprises et déjà installées sur l’haut-parleur.

Produktspezifikationen