APC NetBotz AP9335T Bedienungsanleitung

APC Nicht kategorisiert NetBotz AP9335T

Lies die bedienungsanleitung für APC NetBotz AP9335T (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 12 Bewertungen. Hast du eine Frage zu APC NetBotz AP9335T oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Temperature Sensor (AP9335T)
Installation Instructions
Inventory
Installation
Caution: To avoid damaging the sensor, do not use a tie wrap or wire clip directly on the
sensor when securing it. Use a tie wrap or wire clip, as shown in these instructions, about
half an inch from the end of the sensor.
Note: Use adhesive cable tie holders, tie wraps, and wire clips to secure the sensor cable.
3.96-m (13-ft) temperature sensor (1)
#6 x 3/4-in sheet
metal screw (1)
#8 wall anchor (1)
203-mm (8-in) tie wrap (5) 19-mm x 19-mm (3/4-in x 3/4-in)
adhesive cable tie holder (3)
Wire clip (6)
Customer support and warranty information is available at our Web site, www.apc.com.
© 2010 Schneider Electric. All rights reserved. The Schneider Electric logo is owned by Schneider
Electric Industries, S.A.S., or its affliliated companies.
990-3505A
03/2010
Vertical rail
Door
Wall


Produktspezifikationen

Marke: APC
Kategorie: Nicht kategorisiert
Modell: NetBotz AP9335T

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC NetBotz AP9335T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten