APC NetBotz NBES0313 Bedienungsanleitung

APC Nicht kategorisiert NetBotz NBES0313

Lies die bedienungsanleitung für APC NetBotz NBES0313 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 21 Bewertungen. Hast du eine Frage zu APC NetBotz NBES0313 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
NetBotz® Door Switch Sensors for APC® Racks (NBES0313)
Installation Instructions
Inventory
Installation
Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz
products. See your NetBotz product documentation for details.
Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the
RJ-45 coupling and standard CAT-5 cabling.
Switch with connected 1.57-m (62-in) door switch
sensor cable
Magnet
M3 hex nut (2)
6-32 x 5/16-in screw (4)
Wire clip (8) 63.5-mm (2.5-in) dual adhesive
tape (2)
203-mm (8-in) tie wrap (5) Adhesive cable tie holder (5) RJ-45 coupling (1)
Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2011 Schneider Electric. All rights reserved. All Schneider Electric trademarks are property of Schneider
Electric S.A.S or their subsidiaries. Other trademarks are property of their respective owners.
990-4589
9/2011
1
1
1
11 Front Door of NetShelter® SX Enclosure
2Rear Door of NetShelter SX Enclosure


Produktspezifikationen

Marke: APC
Kategorie: Nicht kategorisiert
Modell: NetBotz NBES0313

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC NetBotz NBES0313 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten