Aquatic AV AQ-RFDM-4F Bedienungsanleitung

Lies die bedienungsanleitung für Aquatic AV AQ-RFDM-4F (1 Seiten) kostenlos online; sie gehört zur Kategorie Regeln. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 8 Bewertungen. Hast du eine Frage zu Aquatic AV AQ-RFDM-4F oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Mounting Instructions for Flush Mount, Fixed Waterproof Remotes

AQ-WR-4F / AQ-RFDM-4F

Aquatic AV recommends the “measure twice, cut once” method!

1. Measure and trace the required mounting hole (52.5 mm diameter) in the desired location.

2. Use a Hole Saw to cut out the hole.

3. Make sure the remote ts snuggly into the hole before proceeding any further.

4. For AQ-WR-4F model - install the required length of Aquatic AV extension cable* from the source unit to the remote

mounting position, making sure the cable is not stretched or compromised at any point.

5. Insert and secure the two mounting screws into the rear of the remote control (see ‘A’ below).

6. Attach the U-shaped bracket (see ‘B’ below) over the two mounting screws and secure the into the desired location, making

sure to leave enough clearance to secure the mounting screws tightly.

Note: the U-shaped bracket can be shortened to achieve the ideal mounting on surfaces of different thickness/depth.

A

B

*AQ-WR-4F model only will require an extension cable (sold seperately):

AQ-EXT-3 (3ft length), AQ-EXT-12 (12ft), AQ-EXT-24 (24ft)

Produktspezifikationen