Aquatica Water Wizard Bedienungsanleitung
Aquatica
Beleuchtung
Water Wizard
Lies die bedienungsanleitung für Aquatica Water Wizard (5 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 34 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 17.5 Bewertungen. Hast du eine Frage zu Aquatica Water Wizard oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5
WATER WIZARD
Technical Lighting Control
WATERPROOF
HOUSING FOR
®
Pocket Wizard Plus III
USER MANUAL
3025 De Baene, Montreal, Quebec, Canada, H4S 1K8
info@aquatica.ca www.aquatica.ca
Tel.: -737-9481514
Foreword
Technical Lighting Control would like to thank you for acquiring the Water Wizard housing for your Pocket Wizard Plus III
transceiver. Technical Lighting Control is part of a group, along with Aquatica and Amphibico, of afliated companies that
dedicates themselves in the underwater imaging enthusiast the best instrument for their passion. The products are
developed by and for demanding professional in this eld.
With regular maintenance, your Water Wizard housing will gives you years of faithful service, before using it, we
recommend that you make yourself familiar with the Pocket Wizard® Plus III transceiver and take a moment to read this
owner manual.
Instruction:
First unscrew the four hexagonal screws that close’s the front cover, remove this cover and place somewhere clean and
safe.
Plug in the mini phone jack into the transceiver; position it so that the dowel pin ts properly in the mounting hole in the
back of the transceiver.
Inspect and clean and lubricate the O-ring and close back the cover, tighten down the screws, making sure not to over
torque them.
Remove the bulkhead cap, inspect for cleanliness, lubricate the sync cord and/or extension cord O-ring and install in the
Water Wizard bulkhead connector, connect the end of the sync cord to the camera housing or the underwater strobe(s).
Most common sync cords used are:
Ikelite to Nikonos single sync cord # 4104.31: For connecting the Water Wizard housing to most housing equipped with a
Nikonos type of strobe connector
Ikelite to Ikelite single cord # 4103.51: For connecting the Water Wizard housing to one Ikelite strobe or to any housing
equipped with an Ikelite bulkhead.
Ikelite to Ikelite double cord # 4103.52: For connecting the Water Wizard housing to two Ikelite strobes.
Ikelite to Sea & Sea single cord # 4118.1: For connecting the Water Wizard housing to one Sea & Sea or Inon strobe.
Ikelite to Sea & Sea double cord # 4118.2: For connecting the Water Wizard housing to two Sea & Sea or Inon strobes.
Additional extensions are also available:
Ikelite 4.5m/15ft extension cord # 4102.15 Ikelite 0.9/3ft extension cord # 4102.03
Check for additional sync cords combination. www.ikelite.com
1
2
3
3
3
3
5
7
7
64
1) ON/OFF BUTTON
2) TEST / TRIGGER BUTTON
3) CLOSING FASTENER (4x)
4) HEXAGONAL KEY
5) CONNECTING BULKHEAD
6) BULKHEAD CAP
7) 1/4-20" THREADED MOUNTING HOLE
Produktspezifikationen
| Marke: | Aquatica |
| Kategorie: | Beleuchtung |
| Modell: | Water Wizard |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Aquatica Water Wizard benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Aquatica
4 März 2024
Bedienungsanleitung Beleuchtung
- CENTURY
- Cotech
- Revo
- Massive
- Mesko
- ILive
- Anslut
- Philips
- GVM
- IKEA
- Sengled
- Sagitter
- Nexxt
- Toolcraft
- Blizzard
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025