Arecont Vision AV2256PM Bedienungsanleitung


Lies die bedienungsanleitung für Arecont Vision AV2256PM (20 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Arecont Vision AV2256PM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/20
Arecont Vision MegaDome
®
2 Installation Manual
0 | Page
Arecont Vision MegaDome
®
2 Installation Manual
1 | Page
MegaDome
®
2 Installation Manual
Inside the box:
A. Arecont Vision MegaDome
®
2 camera
B. Mounting template
C. Rubber gasket (preinstall on bottom of
camera)
D. AC & DC power cable
E. I/O cable
F. Installation manual
G. CD with AV100 software and user
manuals (License Key Required for
Recording)
H. Pack of four (4) wood screws and four (4)
dry wall anchors
I. Security L-Key
J. One double-sided hex key
K. One single-sided hex key
Not included but needed:
#1 Phillips head screwdriver
#2 Phillips head screwdriver
Image 1
Mounting the Camera:
1. Remove the camera and hardware from the
box.
2. Using the mounting template, prepare the
mounting surface for camera installation.
NOTE: the 19.5mm diameter hole on the
Mounting template is where the Ethernet
cable will be exiting the MegaDome
®
, align
accordingly. If using the side conduit hole,
please see step 4 following.
3. Using Security L-key, loosen the four (4)
screws securing the dome cover (Image 2).
Remove the vandal resistant dome cover.
NOTE: Do not remove the screws from the
dome cover.
Image 2
G
F
E
C
A
D
B
H
I
J
K


Produktspezifikationen

Marke: Arecont Vision
Kategorie: Sicherheitskamera
Modell: AV2256PM
Eingebaute Lautsprecher: Ja
WLAN: Nein
Bluetooth: Nein
Produktfarbe: Weiß
Übertragungstechnik: Kabelgebunden
Energiequelle: PoE
Befestigungstyp: Decke/Wand
AC Eingangsspannung: 24 V
Netzstandard: IEEE 802.3af
Typ: IP-Sicherheitskamera
Betriebsanleitung: Ja
Montageset: Ja
Zoom-Fähigkeit: Ja
Formfaktor: Dome
Fokus: Motorisiert
Maximale Auflösung: 1920 x 1080 Pixel
DC-Ausgang Volt: 12
Bis zu 30 Frames pro Sekunde: 30 fps
Megapixel insgesamt: 3 MP
Anzahl der Kameras: 1
Tag/ Nachtmodus: Ja
Mindestbeleuchtung: - Lux
Anzahl der Linsen: 1
Eingebaute HDD: Nein
LED Typ: IR
Sensor-Typ: WDR
Wide Dynamic Range (WDR): Ja
Anzahl der Sensoren: 1
Datenschutz-Maskierung: Ja
Ethernet/LAN: Ja
Unterstützte Positionierung: Innen & Außen

Brauchst du Hilfe?

Wenn Sie Hilfe mit Arecont Vision AV2256PM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten