Arecont Vision MegaView AV3125 Bedienungsanleitung


Lies die bedienungsanleitung für Arecont Vision MegaView AV3125 (11 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Arecont Vision MegaView AV3125 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/11
Arecont Vision MegaView
TM
v1 Installation Manual
1 | P a g e
MegaView
TM
v1 Installation Manual
A. Arecont Vision MegaView
Inside the box:
B. Pack of four (4) wood screws and four (4)
dry wall anchors
v1
C. - Security L key
D. TMounting emplate
Image 1
#1 Phillips head screw driver
Not included but needed:
#2 Phillips head screw driver
Mounting the Camera:
1. Remove camera and hardware from the box.
N OTE : MegaView
TM
v1 is available in two
versions, DN a , nd IR shown in image 2. Both
versions have motorized day night switcher
but only IR version supports an LED IR ring.
Image 2
2. e Us the Mounting Template to prepare the
mounting provisions for camera installation.
3. Use the security L-key to adjust
MegaView
TM
v1 bracket to appropriate
position. ( Image 3)
D
A
C
B
IR version
DN version
Arecont Vision MegaView
TM
v1 Installation Manual
2 | P a g e
Image 3
CAUTION: s Only adjust the screw with an
arrow pointing to them on the bracket base
and camera body (Image 4)
Image 4
NOTE : Bracket screws are all security
screws that are tamper- . resistant
NOTE : Bracket with 3 axes enables easy
installation in any location, including 360°
camera body rotation, 90° tilt, 360° bracket
rotation. (image 5)
Image 5
4. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood screws or any other hardware
that fits the mounting application. (image 6)
N OTE: Use junction box adapter, SV-JBA, to
ensure a water tight installation as shown in
Page 5. Use of silicon does not guarantee a
water resistant install.
Image 6
5. Plug Ethernet cable into the MegaView
TM
v1
PoE Female RJ45 connector. (Image 7)
NOTE: MegaView
TM
v1 is a total PoE class 3
solution to power the camera, IR illuminator
and fan.
Image 7
Digital In
Digital Out
Auxiliary Power
PoE RJ45
90
°
360
°
360
°
Adjustable Screws
Arrow


Produktspezifikationen

Marke: Arecont Vision
Kategorie: Sicherheitskamera
Modell: MegaView AV3125

Brauchst du Hilfe?

Wenn Sie Hilfe mit Arecont Vision MegaView AV3125 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten