Arecont Vision MegaView AV5125 Bedienungsanleitung


Lies die bedienungsanleitung für Arecont Vision MegaView AV5125 (11 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu Arecont Vision MegaView AV5125 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/11
Arecont Vision MegaView
TM
v1x Installation Manual
1 P a g e|
MegaView
TM
v1x Installation Manual
Inside the box:
A. Arecont Vision MegaView
v1x
B. Pack of four (4) wood screws and four (4)
dry wall anchors
C. Security L-key
D. Mounting Template
Image 1
Not included but needed:
#1 Phillips head screw driver
#2 Phillips head screw driver
Mounting the Camera:
1. Remove camera and hardware from the box.
NOTE MegaView:
TM
v1x is available in two
versions, DN and IR, shown in t image 2. Bo h
versions have motorized day night switcher
but only IR version supports an IR LED ring.
Image 2
2. e Us the Mounting Template prepare the to
mounting provisions for camera installation.
3. Use the security L-key to adjust MegaView
TM
v1x bracket to appropriate position. ( Image
3)
D
A
C
B
IR version
DN version
Arecont Vision MegaView
TM
v1x Installation Manual
2 P a g e|
Image 3
CAUTION: Only adjust the screws with an
arrow pointing to them on the bracket base
and camera body ( ) Image 4
Image 4
NOTE : Bracket screws are all security
screws that are tamper-resistant.
NOTE Bracket with 3 axes enables easy :
installation in any location, including 360°
camera body rotation, 90° tilt, 360° bracket
rotation. (image 5)
Image 5
4. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood screws or any other hardware
that ts the mounting application. (image 6)
NOTE: Use junction box adapter, -JBA to SV ,
ensure a water tight installation as shown in
Page 5. Use of silicon does not guarantee a
water resistant install.
Image 6
5. Plug Ethernet cable to the MegaViewin
TM
v1x
PoE Female RJ45 connector. ( Image 7)
NOTE: MegaView
TM
v1x is a total PoE class 3
solution to power the camera, IR illuminator
and fan.
Image 7
Digital In
Digital Out
Auxiliary Power
PoE RJ45
90
°
360
°
360
°
Adjustable Screws
Arrow


Produktspezifikationen

Marke: Arecont Vision
Kategorie: Sicherheitskamera
Modell: MegaView AV5125

Brauchst du Hilfe?

Wenn Sie Hilfe mit Arecont Vision MegaView AV5125 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten