Ashdown Engineering RM-C210T-500 EVO II Bedienungsanleitung
Ashdown Engineering
Gitarrenverstärker
RM-C210T-500 EVO II
Lies die bedienungsanleitung für Ashdown Engineering RM-C210T-500 EVO II (6 Seiten) kostenlos online; sie gehört zur Kategorie Gitarrenverstärker. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Ashdown Engineering RM-C210T-500 EVO II oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
Thank you for purchasing your Ashdown Engineering Amplier and welcome to the family!
We really think you’ve made the right choice and know that this amplier will give you years
of great tone and service. It is a machine though and needs to be looked after, please read
through this user manual which will help you get the most out of your new Amp and keep it
running as long as some of our happiest and very famous customers.
Please register this product online so we can make sure we give you years of customer
support through our friendly in-house service centre.
Here is where you need to visit to register your product:
http://www.ashdownmusic.com/register
THANK YOU
REGISTER ONLINE
Ashdown Ampliers reserve the right to change specications without notice. E & O E. All contents © Ashdown 2016.
Inputs
There are two choices of instrument input, these are marked passive and active. The
passive input is high sensitivity and high impedance to suit passive bass instruments.
The active input is much lower sensitivity and impedance to accurately match the signal
from active bass instruments i.e. Those with a built in battery powered pre-amp.
Input control
The input control sets the signal level through the preamp in conjunction with the input
level vu meter. This is adjusted to give a reading of 0vu on the meter for average play-
ing dynamics with occasional peaks into the red region. Please note that the setting of
this may have to be re-adjusted after modication of the E.Q. controls.
Shape
With this button in a xed E.Q. is superimposed on the pre-amp to give a bass & high
boost to the sound. This gives +8db at 50hz and gives +10db at 10khz.
E.Q.
This button switches the equalisation section in or out i.e. the Bass, Middle and Treble
controls and the two rotary controls placed between these.
Equalisation
This consists of bass, middle and treble controls with two more rotary controls placed
in-between. This can be used in a number of ways:
Firstly as a very simple bass, middle and treble tone control section as found on older
traditional ampliers. This is done by leaving the 340hz and 1.6Khz controls set in their
centre positions and using only the bass, middle and treble controls to alter the overall
tone.
Secondly, if more control is required then the 340hz and 1.6Khz controls can also be
used to tailor the E.Q. In the regions between the main tone controls.
This provides a very versatile equalisation section, it is simple to understand and op-
erate, yet provides a wide degree of variation. It retains the simplicity of a three control
tone section but provides the exibility of a graphic equaliser.
Produktspezifikationen
| Marke: | Ashdown Engineering |
| Kategorie: | Gitarrenverstärker |
| Modell: | RM-C210T-500 EVO II |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ashdown Engineering RM-C210T-500 EVO II benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker Ashdown Engineering
16 August 2024
14 August 2024
10 August 2024
31 März 2024
3 Dezember 2023
9 November 2023
Bedienungsanleitung Gitarrenverstärker
- Markbass
- Behringer
- Budda
- API Audio
- Rivera
- Yamaha
- Blackstar
- Roland
- DACS Audio
- AER
- Palmer
- Laney
- Fender
- Voodoo Lab
- Vox
Neueste Bedienungsanleitung für -Kategorien-
12 Juni 2025
10 Juni 2025
10 Juni 2025
7 Juni 2025
7 Juni 2025
30 November 2024
30 November 2024
24 November 2024