Asus RT-BE58 Go Bedienungsanleitung
Lies die bedienungsanleitung für Asus RT-BE58 Go (2 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu Asus RT-BE58 Go oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
RT-BE58 Go
BE3600 Dual Band WiFi Router
Quick
Start Guide
Hardware Explanations
I/O Ports Overview
LED Lights Overview
DC Power input
USB-C PD Type:
+12V/2A, +9V/2A
Operating Temperature 0~40
o
CStorage 0~70
o
C
Operating Humidity Storage50~90% 20~90%
Specications:
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If it has a
battery backup, remove the battery.
1
5
Launch [App] ASUS Router app and follow the
instructions to complete the setup.
Modem back
Unplug
Install your Router
02
1
Plug the adapter into the DCIN port.
2
Connect your modem to WAN port at the back side of the router with the
network cable provided.
3
Power on the modem. Plug modem to the power outlet and power on.
Modem back
4
Check the modem LED lights to ensure the connection is active.
1
If you are using DSL for internet, you
will need your username / password
from your Internet service provider
(ISP) to properly congure your
router.
Modem front
– Or via web browser
3
Connect your PC to LAN port at the back side of the [Wired]
router using an additional network cable.
[Wireless] Connect to the network with default SSID shown on the product
label on the bottom side of your router “ASUS_XX”.
4
Open a web browser.[Wired / Wireless]
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://www.asusrouter.com.
Follow the instructions to complete the setup.
http://www.asusrouter.com
Welcome
Quick Internet Setup
START
– Via app
3
On your iOS or Android mobile device, go to the app store, [App]
search forASUS Router, and download the app.
4
[App] On your iOS or Android mobile device, tapSettings > Wi-Fi, connect
to the default network SSID shown on the product label on the bottom of
the router. Or scan the code on the product label to connect the default
network SSID.
* XX refers to the last two
digits of MAC address.
You can nd it on the
label on the bottom side
of your router.
Create a New Network
Advanced Settings
Welcome to RT-BE58 Go
LED
2
The LED will light up when the hardware is ready.
USB Type-C (DCIN) port
1 GbE LAN port
2.5 GbE WAN port
Reset button
USB 3.0 Gen1x1 port
E26687
Router Setup Steps
ASUS Router
Slide switch
LED indications
Breathing green: Your RT-BE58 Go is starting up
Solid blue (Standby): Your RT-BE58 Go is ready for setup
Solid white: Your RT-BE58 Go has connected to Internet
Solid red: Your RT-BE58 Go has disconnected from Internet
Breathing blue: Your RT-BE58 Go is connecting to a public
WiFi (WISP mode)
Blinking yellow: Your RT-BE58 Go is resetting to factory
defaults
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as
the packaging materials. Please go to https://esg.asus.com/en/Takeback.htm for the detailed recycling information in different
regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we
published the chemical substances in our products at ASUS REACH website at https://esg.asus.com/Compliance.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. To maintain
compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter.
This device is restricted for indoor use.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems.
CAN ICES (B)/NMB (B)
Radio Frequency (RF) Exposure Information
The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada
radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human
contact during normal operation is minimized.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator any part of your body.
This device has been certied for use in Canada. Status of the listing in the Innovation, Science and Economic Development
Canada’s REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian information on RF exposure also can be found at the following web:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
La bande 5150 – 5250 MHz est réservée uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
CAN ICES (B)/NMB (B)
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par cet appareil sans l est inférieure à la limite d’exposition aux fréquences radio d’Innovation,
Sciences et Développement économique du Canada (ISED). Utilisez l’appareil sans l de façon à minimiser les contacts humains
lors d’un fonctionnement normal.
Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.
L’utilisation de cet appareil est autorisée au Canada. Pour consulter l’entrée correspondant à l’appareil dans la liste d’équipement
radio (REL - Radio Equipment List) d’Innovation, Sciences et Développement économique du Canada, rendez-vous sur : http://
www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Pour des informations supplémentaires concernant l’exposition aux fréquences radio au Canada, rendez-vous sur:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
For indoor use only.
Pour une utilisation en intérieur uniquement.
FAQ
Safety Notices
• Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to x it by yourself. Contact a qualied service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.
• The power supply cord(s) must be plugged into socket-outlet(s) that is / are provided with a suitable earth ground.
• The power adapter must comply with Limited Power Source (LPS) or PS2 requirements.
Avertissements de sécurité
• Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0˚C (32°F) et 40˚C (104°F).
• Référez-vous à l'étiquette située au dessous du produit pour vérier que l'adaptateur secteur répond aux exigences de
tension.
• NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé.
• NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit.
• NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un orage.
• NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe.
• NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés.
• Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualié ou votre
revendeur.
• Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au
système.
• Ne placez pas cet appareil à une hauteur supérieure à 2 mètres.
• Les cordons d’alimentation doivent être branchés sur une prise électrique correctement reliée à la terre.
• L’adaptateur secteur doit être conforme aux exigences LPS (Limited Power Source) ou PS2.
Información de seguridad
• Use este producto en entornos sometidos a una temperatura ambiente comprendida entre 0 ˚C (32 ˚F) y 40 ˚C (104 ˚F).
• Consulte la etiqueta de valores nominales situada en la parte inferior del producto y asegúrese de que su adaptador de
alimentación cumple con dichos valores.
• NO coloque el equipo sobre una supercie irregular o inestable. Solicite asistencia técnica si la carcasa resulta dañada.
• NO coloque ni deje caer objetos en la parte superior del producto y no introduzca objetos extraños dentro de él.
• NO exponga el equipo a líquidos, lluvia o humedad, ni lo use cerca de ninguno de tales elementos. NO use el módem durante
tormentas eléctricas.
• Para evitar que el sistema se sobrecaliente, no cubra las ranuras de ventilación del producto.
• NO cubra los oricios de ventilación del equipo de sobremesa para evitar que el sistema se caliente en exceso.
• No intente reparar la fuente de alimentación personalmente si se avería. Póngase en contacto con un técnico de
mantenimiento autorizado o con su distribuidor.
• A n de evitar posibles descargas eléctricas, desconecte el cable de alimentación de la toma de suministro eléctrico antes de
cambiar la posición del sistema.
• NO monte este equipo a una altura superior a 2 metros.
• Los cables de alimentación se deben enchufar a tomas de corriente que estén provistas de una conexión a tierra adecuada.
• El adaptador de corriente debe cumplir con los requisitos de Fuente de Alimentación Limitada (LPS) o PS2.
Informações de segurança
• Utilize este equipamento em ambientes com temperaturas entre 0˚C (32˚F) e 40˚C (104˚F).
• Verique a etiqueta relativa à tensão na parte inferior do seu dispositivo e assegure-se de que o seu transformador
corresponde a essa tensão.
• NÃO coloque o computador em superfícies irregulares ou instáveis. Envie para reparação se a caixa se encontrar danicada.
• NÃO coloque nem deixe cair objetos em cima do aparelho e não introduza quaisquer objetos estranhos no produto.
• NÃO exponha o equipamento nem o utilize próximo de líquidos, chuva ou humidade. NÃO utilize o modem durante
tempestades eléctricas.
• NÃO tape os orifícios de ventilação do produto para impedir o sobreaquecimento do sistema.
• NÃO utilize cabos de alimentação, acessórios ou outros periféricos danicados.
• Se a fonte de alimentação estiver avariada, não tente repará-la por si próprio. Contacte um técnico qualicado ou o seu
revendedor.
• Para evitar o risco de choque eléctrico, desligue o cabo de alimentação da tomada eléctrica antes de deslocar o sistema.
• NÃO instale este equipamento a uma altura superior a 2 metros.
• O(s) cabo(s) de alimentação deve(m) ser ligado(s) a tomadas elétricas com ligação à terra adequada.
• O adaptador de energia deve estar em conformidade com os requisitos de Fonte de Poder Limitada (LPS) ou PS2.
FREQUENTLY ASKED QUESTIONS
Q1:
Where can I nd more information about the wireless router?
Technical support site: https://www.asus.com/support
Service and Suppor
Service and Suppor
Service and Suppor
Service and Support
t
t
tService and Support
https: www.asus.com/support//
Video
Video
Video
Video T
T
T
Tutorials
utorials
utorials
utorialsVideo Tutorials
https://qr.asus.com/wl_videotutorials
Q2:
How to connect RT-BE58 Go to a mobile hotspot?
During the QIS process, navigate to > > for more information.Manual setting Router mode Mobile tether
Q3:
Why am I unable to use my mobile hotspot connection properly?
Please use a charger or power bank that supports the standard PD protocol, or a USB charger with an
output of 9V/2A or 12V/2A.
Produktspezifikationen
| Marke: | Asus |
| Kategorie: | Router |
| Modell: | RT-BE58 Go |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Asus RT-BE58 Go benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Router Asus
29 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
24 Juli 2025
23 Juli 2025
Bedienungsanleitung Router
- Beafon
- Allied Telesis
- Proximus
- Sagemcom
- Tenda
- A-NeuVideo
- Bosch
- Vonroc
- Dell
- 7inova
- KanexPro
- Eero
- Milwaukee
- Comprehensive
- Aruba
Neueste Bedienungsanleitung für -Kategorien-
29 August 2025
29 August 2025
29 August 2025
29 August 2025
28 August 2025
27 August 2025
26 August 2025
26 August 2025
26 August 2025
26 August 2025