Asus ZenWiFi ET8 Bedienungsanleitung

Lies die bedienungsanleitung für Asus ZenWiFi ET8 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 13 Bewertungen. Hast du eine Frage zu Asus ZenWiFi ET8 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ASUS ZenWiFi ET8

AXE6600 Tri Band WiFi Router

Model: ET8

Quick

Start Guide

1

Plug the adapter into the DCIN port, and press the power button.

2

The power LED will light up when your hardware is ready.

Hardware Explanations

Button and Port Explanations

Power buttonDC-IN port

2.5G / 1G

WAN port

LAN ports 1-3USB 3.0/2.0 port2.5G / 1G WAN port

Connect your optical modem to this

port with a network cable.

LAN ports 1-3

Connect your PC to a LAN port with

a network cable.

Before Setup

ASUS Router App

AiMesh Setup Steps

Troubleshooting

1

Find two ZenWiFi ET8, and power both on.

2

Use a network cable to connect your optical modem to the WAN port of either ZenWiFi ET8.

This ZenWiFi ET8 will be the AiMesh router, and the other ZenWiFi ET8 will be the AiMesh

node.

3

The LED turns solid blue to indicate that ZenWiFi ET8 is ready for setup.

Preparing to set up an AiMesh WiFi system

AiMesh Setup Steps

AiMesh routerAiMesh node

Download free ASUS Router APP to set up

and manage your router(s).

AiMesh routerAiMesh node

within

3 meters

Prepare

01

Place your AiMesh router and node within 3 meters of each

other during the setup process.

AiMesh node

02

Keep your AiMesh node powered on and standby for AiMesh

system settings.

Enable Bluetooth on your phone.Launch ASUS Router APP, and then follow the on-screen

instructions to finish the AiMesh setup.

Enabling BluetoothLaunching ASUS Router APP

03 04

If your AiMesh router cannot find any AiMesh node nearby or

synchronization fails, please check the following and try again.

a

Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is

within 3 meters.

b

Your AiMesh node is powered on.

DC Power adapterDC Output: +19V with max 1.75A current

Operating Temperature0~40oCStorage 0~70oC

Operating Humidity50~90%Storage 20~90%

Specications:

NOTE: When you’re using a wireless backhaul to connect your router

and AiMesh node, the WAN port on your AiMesh node can be

used as a LAN port providing up to 2.5G transmission speed.

CA17882_ZenWiFi_ET8_One-page_2PK_QSG.indb 1

CA17882_ZenWiFi_ET8_One-page_2PK_QSG.indb 1

CA17882_ZenWiFi_ET8_One-page_2PK_QSG.indb 1

CA17882_ZenWiFi_ET8_One-page_2PK_QSG.indb 1CA17882_ZenWiFi_ET8_One-page_2PK_QSG.indb 109/02/2021 15:21:32

09/02/2021 15:21:32

09/02/2021 15:21:32

09/02/2021 15:21:3209/02/2021 15:21:32

Produktspezifikationen