AT&T TL7610 Bedienungsanleitung

Lies die bedienungsanleitung für AT&T TL7610 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 18.5 Bewertungen. Hast du eine Frage zu AT&T TL7610 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Frequently asked questions

Will not pair to base (How to register headset):

Ensure you have a compable AT&T phone system. Visit for a DECT 6.0 Compability

list of compable systems. Also, ensure that your cordless phone system has the

capacity for an addional handset or headset.

First, you will need to de-register the cordless headset from its base:

Step 1:basePAIRMUTE On the cordless headset , press and hold , unl the light starts

to ash. This takes about 10 seconds. The headset can be either in or out of the Note:

charge cradle.

Step 2: Once the MUTE light begins ashing, release the PAIR buon, then immediately

press and release it again. Soon, the light on the headset will ash every ve ON/OFF

seconds to conrm that de-registraon was successful.

Now you can register the cordless headset to your compable AT&TDECT 6.0 cordless

telephone system:

Step 1: Ensure that the cordless headset is in the charge cradle. On the cordless

telephone base, press and hold , unl the light comes on.HANDSET LOCATORIN USE

Step 2: Immediately release the HANDSET LOCATOR buon.

Soon, the light on the headset will illuminate to conrm thatregistraon was ON/OFF

successful.

If registraon is not successful by the me the IN USE light goes out, li the headset

from its charge cradle. Aer a few seconds, return the headset to its charge posion,

and try the registraon process again.

NOTE: Once the TL7610 headset is registered to the phone system, the controls on the

cordless headset base become inoperave.

Produktspezifikationen