Atlantic H-PAS AT-2 Bedienungsanleitung
Atlantic
Lautsprecher
H-PAS AT-2
Lies die bedienungsanleitung für Atlantic H-PAS AT-2 (12 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 11 Bewertungen. Hast du eine Frage zu Atlantic H-PAS AT-2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
Instruction Manual
AT-2
High Performance Loudspeaker
with H-PAS™ Technology
2
AT-2 High Performance Loudspeaker with H-PAS™ Technology
Table of Contents
The contents of this manual are Copyright © 2011 by Atlantic Technology International,
Corp., and may not be duplicated or reproduced by any means, whether physical, electronic
or otherwise without prior written consent from Atlantic Technology International, Corp.
Atlantic Technology and the Atlantic Technology logo are registered trademarks of Atlantic
Technology International, Corp.
Specifications are those in effect at the time of printing. Atlantic Technology International,
Corp. reserves the right to change specifications or designs at any time without notice
without obligation to modify existing units.
AT-2
High Performance Loudspeaker with
H-PAS™ Technology
Thank you for choosing Atlantic Technology products. Your new speaker has
been precision-crafted to give you years of enjoyable, trouble-free service.
This manual covers the Atlantic Technology AT-2 speaker. It will show you
how to incorporate these speakers into your present setup, as well as how
to assemble a complete music or home theater system from them. The AT-2
can be used with all current and past sound formats including Stereo, all
Dolby and DTS formats, DVD-Audio and SACD Audio.
Introduction
The Model AT-2 is a 2-way system of extraordinarily high performance
intended for use in a top-quality music or home theater system. Its patent-
pending H-PAS™ bass technology enables the AT-2 to deliver powerful low
bass performance (-3 dB @ 44 Hz) not previously achievable with compa-
rably-sized drivers in similar-sized enclosures.
Each speaker contains one GLH (Graphite Loaded Homopolymer) 5¼"
(135mm) woofer and an advanced 11
⁄8" (28mm) ferrofluid-cooled, Low
Resonance silk dome tweeter with an integral back chamber/heatsink. These
components are mounted in an acoustically inert MDF enclosure, with spe-
cial proprietary internal bracing, called CDFF™ (Cross Design Free Flow).
This bracing makes the enclosure extremely rigid, while perfectly maintain-
ing the internal airflow that is critical to its performance.
IMPORTANT:
Although it may seem like asking for driving directions,
please take a few moments to read all of this booklet. It has many
helpful tips and ideas on properly setting up and using your system.
We promise that if you take the time to read and follow these tips
you’ll get better system performance and more enjoyment.
Table of Contents
2 Introduction
3 Unpacking the Speakers
3 Attaching the Feet
3 Attaching the Grilles
3 Glass Tops
4 Placement
4 Using the AT-2 in a 2-channel Music System
4 Using the AT-2 in a Home Theater System
6 Connecting Your Speakers
6 Conventional Connection
6 Bi-amp Connection
6 Wire Management System
7 System Wiring
8 High Frequency Energy Control
9 Caring for Your Speakers
9 Specifications
For Future Reference
Record the serial number and date of purchase for each speaker here. The serial number
is found on the speaker terminal panel on the back of the enclosure.
Serial Number
Serial Number
Date of Purchase
Instruction Manual
3
Unpacking and Assembly
Unpacking the Speakers
Use care when unpacking the speakers. Since the grilles are packed off the
speakers, be particularly careful of the driver elements as you unpack and
move the speakers. Remember to keep the original boxes and packing mate-
rial, in the unlikely event the speakers need servicing, or if you move.
Attaching the Grilles
The included metal grilles are held to the front of the enclosures with power-
ful neodymium magnets. There are depressions on the back of the grille that
the magnets fit into. Once the speakers are in their final position, remove
the grille from its protective plastic bag and carefully position it over the
magnets on the baffle.
Move them together slowly and when you get close enough, the magnets
will draw the grille in and hold it tight. Be careful not to get your fingers
caught between the grille and the cabinet.
Using the AT-2 on Speaker Stands
Many high-quality speaker stands—like the Sanus® Ultimate
Foundations®--use a through-bolt that goes through the stand’s top plate
and attaches to a ¼”-20 threaded insert in the bottom of the speaker. If you
are using speaker stands with your AT-2’s, we suggest using this type of
stand, since it provides the most rigid assembly for the best acoustic perfor-
mance, and the most secure installation for maximum safety. (See figure 1)
¼" x 20 insert
AT-2
Figure 1
Top plate of stand
with through-hole
¼" x 20 bolt
Figure 2
AT-2 High-performance
loudspeaker
Produktspezifikationen
| Marke: | Atlantic |
| Kategorie: | Lautsprecher |
| Modell: | H-PAS AT-2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Atlantic H-PAS AT-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Atlantic
12 Juni 2025
23 September 2024
6 September 2024
5 August 2024
4 August 2024
28 Juli 2024
26 Juli 2024
25 Juli 2024
19 Juli 2024
14 Juli 2024
Bedienungsanleitung Lautsprecher
- MB Quart
- S-Digital
- MarQuant
- AmpliVox
- Bopita
- Novero
- Reflexion
- Makita
- MONDO
- Standard Horizon
- Arctic
- N-Gear
- Zagg
- Paulmann
- Sanus
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025