Atlas Sound IP-22SYSP Bedienungsanleitung

Lies die bedienungsanleitung für Atlas Sound IP-22SYSP (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 5 Bewertungen. Hast du eine Frage zu Atlas Sound IP-22SYSP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

©2023 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS007305 RevA 2/23

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

Indoor 2' x 2' Suspended Ceiling Mount Passive Speaker Install Sheet

IP-22SYSP

1. Remove power from the IPX that will be used to power the IP-22SYSP.

2. Connect the field wiring leads to pins 13 and 14 of the IPX endpoint speaker.

3. Remove E.O. box cover (A) on enclosure.

4. Use two wire nuts to attach the white (+) and black (-) leads to the field wiring.

5. Install the IP-22SYSP into the grid.

6. Apply power to the IPX and configure.

Note:Wiring cavity is not intended to be used as a junction box. A UL recognized conduit clamp must be used for conduit connections.

Installation must comply with all Building Codes and NFPA guidelines. Installation must adhere to N.E.C. and NFPA 70/72 wiring directives and comply

with all National and Local Building Codes.

–

+

1234567891011121314

A

Produktspezifikationen