Atlas FAP8CXT Bedienungsanleitung

Atlas Lautsprecher FAP8CXT

Lies die bedienungsanleitung für Atlas FAP8CXT (1 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Atlas FAP8CXT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/1

FAP8CXT

Installation Instructions

ATS002573 RevA 12/06

FAP8CXT

Installation

Instructions

Mounting

Template

⁄8" Dia.

The Atlas Sound Strategy II Series

assembles and mounts easily

into

existing construction drop ceiling or drywall materials.

Painting

Shield

⁄4" Dia.

DROP TILE CEILING INSTALLATION

1. Remove 2'x2' or 2'x4' tile.

2. Align the adjustable dual rail and C-ring assembly on rear of tile in desired position.

3. Using template provided; mark the cutout circle in the d

esired mounting location, 14" dia. mounting hole.

4. Affix C-ring assembly to rails using screws provided and position assembly on rear of ceiling tile.

Replace tile into grid making sure that formed ends of tile bridge rails engage T-bar tile support rails.

5. Bring service loop from rear of tile, through tile bridge C- ring to access panel located on side of enclosure.

Terminate the service loop to Phoenix style connector provided (please note polarity). Combination knockouts are

provided to facilitate conduit. A UL recognized conduit connector should be used to terminate conduit.

Connection cavity is not intended for use as a junction box.

6. Insert enclosure through front of tile. Using standard #2 Phillips screwdriver or screw-gun, tighten

(4) dogleg assemblies until they engage C-ring assembly. DO NOT OVER-TIGH TEN DOG LEG SCREWS!

7. Adjust front mounted switch to desired wattage tap setting or 8Ω*. (See important note regardi ng 8Ω operation)

8. Install press-fit grille into front bezel ring. Push baffle upwards until baffle is flush with bezel ring.

9. For safety and seismic considerations a suspension ring is in

tegrated into input panel section of uni

t. Atlas Sound strongly suggests that

a support wire be installe d

from th is support point to a suitable anchor point above ceiling grid. In drop til

e applica tions, this wire can

usually be installed from an adjacent tile access near speaker location.

DRY WALL ("HARD DECK") INSTALLATION

1. Using template provided; mark the cutout circl e in the desired mounting location, 14

" dia. mounting hole.

2. Place tile bridge rai ls and C-ring through

hole. Use V-shaped edge of C-ring t

o align tile bridge assembly above ceiling

(alignment screws provided are not required for this type of installation)

3. Bring service loop from rear of tile, through tile bridge C-ring to access panel locat

ed on sid e of enclosure. Terminate the service loop to

Phoenix style connector provid ed (please note polarity). Comb ination kn

ockouts are

provided to fa

cilitate conduit. A UL recognized conduit connector

should be used to terminate conduit. Connection cavity is not i ntended for use as a jun

cti on box.

4. Insert enclosure into hole. Using standard #2 Phillips screwdriver or screw-gun, tighten (4) dogleg assemblies until they engage the C-ring assembly.

DO NOT OVER-TIGHTEN DOG LEG SCREWS!

. Adjust fro nt mounted switch to desired wattage tap setting or 8Ω*. (See important note regardin g 8Ω operation)

6. Install press-fit grille into front bezel ring. Push baffle upwards until baffle is f

lush with beze

l ring.

New Construction (Drywall Ceilings)

Use of optional FAP82-TR1 new construction bracket essentially reserves speaker mounting location prior to

drywall installation i n n

ew constru ction. The

bracket mounts between 16" or 24" OC studs and include s a 3⁄8" downward lip to pro vide a template for drywall installers to cut around. For final installation,

please follow instructions below. Note: tile bridge components are not used in new c

onstruction application s where new construction bracket is utilized.

1. Bring ser vice loop through hole i n ceiling provided by pre construction bracket to access panel located o n side of Enclosure.

Terminate service loop to Phoenix style connector provided (please note polarity). Combination knockouts are provided to facilitate conduit.

Insert speaker assembly into hole. Using standard #2 P h

illips screwdriver or screw-gun

, tighten (4) dog leg assemblies until th ey engag

e rin g provided

on new construction bracket. DO NOT OVER-TIGHTEN DOG LEG SCREWS!

3. Adjust front mounted switch to desired wattage tap setting or 8Ω* (See i mpor

tant no te regarding 8Ω o peration)

4. Install press-fi t grille in

to front bezel ring. Push baffle upwards until baffle is flush with bezel ring.

NOTE: Do

g legs will accommodate ceiling material

thickness up to 1 1⁄4" as shipped from factory .

For thicker ceiling materials (up to 2") simply unsc rew and f

lip dog legs as shown.

DO NOT OVER-

TIGHTEN DOG LEG

S IN EITHER CONFIGURATION!

NOTE: *DO NOT USE 8Ω SETTING WITH 70.7V/100V S

YSTEMS!

*DO NOT OVERPOWER IN 8Ω CONFIGURA

TION!

AMPLIFIER OUTPUT SHOULD NOT EXCEED

70W RMS @ 8Ω PER SP

EAKER

1FAP8 2

-TR NOT TESTED OR EVALUATED BY UNDERWRITERS LABRATORIES (UL)

A UL RECOGNIZED CONDUIT CLAMP MUST BE USED FOR CONDUIT CONNECT IONS. CABLE CONNECTION CAVITY IS NOT INTENDED TO BE USED AS A JUNCTION BOX.

FREQUENCY RESPONSE: 60Hz -15kHz

SENSITIVITY: 92dB (1W/1M)

FAP8CXT

Typical Parallel Hookup of Full Range 70.7/100V Speakers

Auxillary Suspension Point

Dog Leg

In Normal

Position Tile Bridge

Ceiling Material up to 1-1/4

Auxillary Suspension Point

Dog Leg

In Inverted

Position Tile Bridge

Ceiling Material up to 2

Produktspezifikationen

Marke:	Atlas
Kategorie:	Lautsprecher
Modell:	FAP8CXT
Breite:	400 mm
Produktfarbe:	Weiß
Impedanz:	8 Ohm
RMS-Leistung:	60 W
Paketgewicht:	10430 g
Menge pro Packung:	1 Stück(e)
Anzahl der Lautsprecher:	1
Frequenzbereich:	60 - 15000 Hz
Tieftönerdurchmesser (imperial):	8 "
Lautsprecherplatzierung:	Deckenmontage möglich
Empfindlichkeit:	92 dB
Tieftönerdurchmesser:	203 mm