Atlona AT-HDR-MX1616 Bedienungsanleitung
Lies die bedienungsanleitung für Atlona AT-HDR-MX1616 (8 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu Atlona AT-HDR-MX1616 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
1
Installation Guide
AT-HDR-MX1616
4K HDR HDBaseT Matrix Switcher
AT-HDR-MX1616
The Atlona AT-HDR-MX1616 is a 16x16 HDMI
®
to HDBaseT™ matrix switcher for high dynamic
range (HDR) formats. It is HDCP 2.2 compliant, supports 4K/UHD video @ 60 Hz with 4:4:4 chro-
ma sampling, and data rates up to 18 Gbps.
IMPORTANT: Visit https://atlona.com/product/at-hdr-mx1616 for the latest rmware
updates and Installation Guide.
1 x AT-HDR-MX1616
16 x Captive screw connector, 3-pin
1 x IEC Cable
1 x Pair of mounting ears w/screws
4 x Feet w/screw
1 x Installation Guide
Package Contents
2
Installation Guide
AT-HDR-MX1616
Panel Descriptions
AT-HDR-MX1616
21 3 5 6 7 84
109 11 13 14 15 1612
OUTPUT
ENTER
123
4
ON
ANALOG
L R
IR
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
ON
OFF
LAN RS- 32 IR EXT ED D
ETHERNETRE ET
AC 100-240V
50/60Hz
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
IR OUT
1 2 3 4
5 6
7
8 9
10 11 12 13 14 15 16
ANALOGIR
ANALOG
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
1 Front Panel Display
Front panel display will show the on-
screen menu for routing.
2 Selection Buttons
Use to route inputs and outputs via the
OSD.
3 HDBaseT OUT
Connect PoE compatible receivers to this
port.
4 HDMI OUT
Connect an HDMI display to this port. This
port is mirrored and will display the same
content as the HDBaseT OUT port.
5. INPUT
Connect an HDMI source to this port.
6 AUDIO OUT
Connect the included 3-pin captive screw
connector between this port and an
amplier.
7 IR
Connect an IR receiver or control system
to this port for remote device control.
8 Reset
Press and hold for 5 seconds to reset the
IP mode to DHCP or press and hold for
15 seconds to reset the unit to factory
settings.
9 ETHERNET
Connect an RJ45 cable to this port to
a network switch or source for Ethernet
pass through. When connected to a
network switch, Ethernet will pass to
compatible remote HDBaseT receivers.
10 LAN
Connect an RJ45 cable to this port for
TCP/IP and Web Server control of the
matrix.
11 RS-232
Connect to an RS-232 device or control
system.
12 IR EXT
Connect to an IR Receiver for use with an
IR remote.
13 EDID
Use to manually set the EDID mode for
the unit.
14 IR OUT
Connect IR transmitters to these ports for
local device control.
15 AC 100-240V 50/60Hz
Connect the included IEC cable from this
port to a wall to power the unit.
8
149 10 11 12 13
3
4
5
6
7
15
21
3
Installation Guide
AT-HDR-MX1616
Audio
Mounting Instructions
Connect to an audio DSP, amplier, or other audio distribution or player devices. Only
unbalanced connections may be used.
L
R
L - Signal
Ground
R - Signal
Unbalanced
The AT-HDR-MX1616 can be placed freestanding on top of a desk, a table, or in a cabinet. To
prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been
included.
Surface mounting
The AT-HDR-MX1616 can be placed freestanding on top of a desk, a table, or in a cabinet. To
prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been
included.
1. Turn the unit upside down.
2. Install each foot using the included feet screws, the rubber grips of the feet should be facing
up during installation.
3. Turn the unit right-side up and place it in the desired location.
AT-HDR-MX1616
21 3 5 6 7 84
109 11 13 14 15 1612
OUTPUT
ENTER
Tip (+)
RCA
Sleeve ( Ground)
Produktspezifikationen
| Marke: | Atlona |
| Kategorie: | Schalter |
| Modell: | AT-HDR-MX1616 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Atlona AT-HDR-MX1616 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter Atlona
14 Juli 2025
9 Juni 2025
16 Januar 2024
Bedienungsanleitung Schalter
- Ubiquiti Networks
- Gigahertz Solutions
- Basetech
- Orei
- Fantini Cosmi
- Digitus
- Techly
- PAC
- Doepke
- Vimar
- Renkforce
- Goobay
- ConnectPro
- Burg Wächter
- Trotec
Neueste Bedienungsanleitung für -Kategorien-
14 Juli 2025
14 Juli 2025
14 Juli 2025
14 Juli 2025
14 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025