Atlona AT-PA100 Bedienungsanleitung

Atlona Nicht kategorisiert AT-PA100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlona AT-PA100 (10 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 3.6 Sternen bewertet

Download PDF

Seite 1/10

www.atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

User Manual

Stereo/Mono Audio Amplifier with 3 Inputs

(2 x Stereo, 1 x MIC)

AT-PA100

www.atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

1. Introduction .................................................. 2

2. Features .................................................. 2

3. Specification .................................................. 2

4. Audio Connection .................................................. 3

4.1. Default mode .................................................. 3

4.2. Bridge mode .................................................. 3

4.3. Dual-mono mode .................................................. 4

5. Push-Button Controls .................................................. 4

6. RS232 Communication Protocol .................................................. 5

7. Connection Diagram .................................................. 6

8. Safety Information .................................................. 7

9. Warranty .................................................. 8

10. Atlona Product Registration .................................................. 9

TABLE OF CONTENTS

www.atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The Atlona AT-PA100 is an Audio Amplifier with 3 Inputs (2 x Stereo, 1 x MIC). The PA100 is based on the digi-

tal amplification circuit (Class-D) and can operate in Stereo mode 2x20w or in Bridge mode (Mono) at 1x40W.

The Atlona amplifier has a built-in EQ control to allow you to adjust Bass and Treble and also mix in a Mic sig-

nal.

It supports RS232 and IR for remote control which is useful in commercial applications when a 3rd party control

systems is utilized.

Audio Input Audio Output

Input Output2 x stereo audio, 1 x MIC 1 x Amplifier, 1 x stereo audio

Input Connector 2 x RCA, 1 x 3.5mm jack,

1 x 6.5mm jack

Output Connector 1 x 3.5mm jack, 1 x Phoenix

connector, 4 pole

Input Impedance Output Impedance>10KΩ50 /stereo, 4~8 /AmplifierΩ Ω

Audio General

Frequency Re-

sponse

20Hz ~ 20KHz >70dB@20Hz~20KHzCMRR

SMR Bandwidth80 dB at maximum output 20Hz ~ 25KHz

Stereo Channel

Separation

>75 dB @ 20 Hz to 20 kHz 1% @ 1 kHz, 0.3% @ 20 kHzTHD + Noise

at nominal level

Voltage Gain Power Output32dB 20 Watts X 2 (4 )Ω

Control Parts

Serial Control Port Pin ConfigurationsRS-232, 9-pin female connector 2 = TX, 3 = RX, 5 = GND

Remote Front Panel ControlOptional IR remote Optional mountable keypad

Options TCP/IP control via RS232 to TCP/IP adapter

NOTE: All measurement levels are at ±10%.

• Class-D Stereo/Mono Audio Amplifier

• 2x20Watt @ 4 or 1x40Watt @ 8 , amplifier can be used to amplify 2 speakers or one speaker when in Ω Ω

Bridge mode.

• Dual-Mono mode combines left and right input channels, outputting a mono signal to 2 speakers.

• Microphone mixer function: A microphone can be mixed in with the line audio output signal and provide

a discreet volume control.

• Two stereo audio inputs, one Microphone input, and Volume/Bass/Treble are controlled by the front

panel buttons or RS232.

• RS232 control ability provides instant command status.

• Included universal power supply (110Volt~220Volt AC, 50/60Hz) for worldwide compatibility.

INTRODUCTION

SPECIFICATIONS

FEATURES

Produktspezifikationen

Marke:	Atlona
Kategorie:	Nicht kategorisiert
Modell:	AT-PA100
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Zweck:	Haus
Gleichstrom-Anschluss (DC):	Ja
Audio Kanäle:	2.0 Kanäle
THD, totalklirren:	- %
Rauschverhältnis (SNR):	80 dB
Frequenzbereich:	20 - 25000 Hz
Leistungshöhepunkt pro Kanal:	20 W
Output Widerstand:	8 Ohm