Atlona AT-VCC-IR-KIT Bedienungsanleitung

Lies die bedienungsanleitung für Atlona AT-VCC-IR-KIT (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 18.5 Bewertungen. Hast du eine Frage zu Atlona AT-VCC-IR-KIT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Installation Guide

AT-VCC-IR-KIT

1

IP to IR Command Converter for Velocity Control System

AT-VCC-IR-KIT

The Atlona AT-VCC-IR-KIT is an accessory for the Atlona Velocity™ Control System that provides

conversion from IP control commands to IR. This Velocity Control Converter is very compact

and can be placed anywhere a device requires IR control. The VCC-IR-KIT is remotely powered

through Power over Ethernet (PoE), or locally from a USB power source. The primary unit installs

onto any surface via a convenient mounting dock. A simple “click” locks it into place for a secure,

reliable installation. The IR adapter module includes three 3.5 mm ports for connecting the AT-

VCC-IR-EMT emitters. Each port is independently addressable, allowing discrete IR control of

three dierent AV devices.

1 x AT-VCC

1 x AT-VCC-IR

Package Contents

Operating Notes

•The Velocity Command Converter must be on the same network as the Velocity Gateway

(AT-VGW-250) or it will be unable to sync for control.

•The AT-VCC-IR-KIT is PoE, to power the unit, simply plug it into a PoE compatible network

switch. If the network switch is not PoE capable, a PoE injector or USB (purchased separately)

can be used.

•All devices (AT-VCC, Velocity, AT-VTP, switchers, etc) should be set to static IPs or the

DHCP IP address reserved for each individual device.

IMPORTANT: Velocity Gateway (AT-VGW-250) must be set up before the AT-VCC-IR-KIT

is fully functional.

Produktspezifikationen