Atoll DR100 Bedienungsanleitung


Lies die bedienungsanleitung für Atoll DR100 (4 Seiten) kostenlos online; sie gehört zur Kategorie CD-Spieler. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu Atoll DR100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ CD DRIVE DR100 Sig - DR200 Sig
ATOLL ELECTRONIQUEPage 5Page 4
Keys 7 to 12 have the same functions as on the front panel.
18) REPEAT Mode (This function is also available while reading the disc)
Press on to choose the repeat mode: REP
: makes a repetition of the same track. Confirm by pressing the key. The R1 ENTER
display shows between the number and the time of the track. R1
: makes a repetition of the complete disc. Confirm by pressing the key. The R ENTER
STOP key (and keys 7) previous track & 8) next track on R1 mode) cancels also all
REPEAT modes.
19) PROGRAM (PROG.):
— Press on The display shows on the Left the number of selected tracks (Nb 0) PROG.
and on the Right the choice of tracks (Tr 1).
— Choose the first track of the program with the selection keys 7 & 8. Confirm
by pressing on Select all tracks needed for the program, using the same PROG.
procedure.
— The display shows the number of tracks (on the Left), symbol. The total time of the P
program is seen by a press on . Press TIME PLAY to start playing the program.
— Press 2 times to cancel the program.
20) SHUFFLE: Press on . The display shows between the number and the time of SHUF S
the track. The disc goes on the play. All tracks will be played once in random mode. Press
STOP to cancel the random play.
SHUFFLE PROG and menus are not available while reading the disc.
Combination: it is possible to combine a program with the REPEAT function (display shows
RP RS) and SHUFFLE functions (display shows ).
21) DISP.: allows to switch off the display.
13) TIME: Displays the running time of each track.
With one press, display the remaining time of the
track.
14) Inactive.
15) Rear fast search key.
16) Forward fast search key.
17) A-B repeat: allows to select a specific reading
zone from point A to point B. While playing, press
this key to start the beginning of zone , press a A
second time to select the end . Selected zone will B
be played until you press again the key.AB
1) Coaxial output (to a converter D/A).
2) Optical output (to a converter D/A).
3) AES/EBU output (only for DR200).
6) Disc tray.
7) Previous track.
8) Next track.
9) Open/close.
4) Power input.
5) Power switch ON/OFF.
10) Pause & Play.
11) Stop: stop functions Play & Repeat.
12) Stand-by: stand-by cancels all
functions.
CONNECTING REMOTE CONTROL
DETAILS OF FUNCTIONS
1 2 3
7 8 9 10 11 12
54
6
21
12
16
8
20
10
13
15
7
18
14
11
17 19
9
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ CD DRIVE DR100 Sig - DR200 Sig
ATOLL ELECTRONIQUEPage 3Page 6
Technical data are subject to modications
E.C. marking certified the conformity with low tension directive 73/23/CEE, directive
CEM 89/336/CEE and national transpositions.
This player can play CD and CD-R discs. Type of formats played: MP3-WMA-AAC
Text: Some disc have “CD Text” available (giving name of artist, name of tracks…).
Those texts are automatically read at the beginning of each track.
E.C. MARKING
COMPATIBILITY
Before any cleaning, switch off your CD player. Use a soft and dry rag to clean up
the appliance. Never use acetone, white-spirit, ammoniac, or any kind of product
containing abrasive agent. Never try to clean up inside the appliance.
The guarantee is period from date of purchase. We recommend you to ask two years
your dealer to fill the guarantee and to conserve it. The guarantee is only available
for appliance which have been use correctly.
CLEANING
WARRANTY CONDITIONS
CAUTIONS
Do not make any connections when your device is turned on.
Install your appliance in a dry, well ventilated place away from
any source of heat.
Make sure you never put anything on your CD player.
Avoid any short circuit.
In the event of a problem, never attempt to repair,
disassemble, or rebuild the device, as this may cause severe
electric shock.
Avoid operating your CD player near a tuner as this may
interfere with the HF reception of the latter.
ADVISES
To optimize the performance of your device, you should switch
it on at least half an hour before any listening, the time for the
output stages to reach its ideal working temperature.
Your device will give you optimal listening quality after this
time-lapse.
Between two uses, it is, therefore, preferable to let the device
in the standby position so that it remains at its optimum
temperature.
At night or when you leave your home, it is best to use the
main switch to turn off the device.
To optimize the sound quality of your system, we recommend
that you choose good-quality connection cords. Do not
hesitate to ask your specialist dealer for advice.
TECHNICAL DATA
DR100 Sig DR200 Sig
Power supply:
Total of capacitors:
Digital output level:
Outputs:
Consumption:
Dimensions (mm):
Weight:
30 VA
14 142 µF
1V
Coaxial-optical
Stand-by: 4 W
ON: 5 W
440 280 95× ×
6 Kg
30 VA
22 100 µF
1V
Coaxial-optical-AES/EBU
Stand-by: 4 W
ON: 5 W
440 284 95× ×
7 Kg
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ CD DRIVE DR100 Sig - DR200 Sig
ATOLL ELECTRONIQUEPage 7Page 2
You have just bought a CD player. with exceptional audiophile
performance. We really thank you for your confidence in our products. To get
the best part of your CD player, please read carefully this manual.
YOU WILL FIND
ENCLOSED
– A CD player.
– A remote control (with 2 batteries Lithium CR2025).
– A powerlead.
– This manual with the certificate of guarantee.
ATOLL ELECTRONIQUE®
is a French Company that designs, manufactures,
and commercializes all its products.


Produktspezifikationen

Marke: Atoll
Kategorie: CD-Spieler
Modell: DR100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atoll DR100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten