Atoll PH200 Bedienungsanleitung

Lies die bedienungsanleitung für Atoll PH200 (33 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 9 Bewertungen. Hast du eine Frage zu Atoll PH200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ATOLL ELECTRONIQUE

OWNER’S MANUAL ~ PHONO PREAMPLIFIER PH200

ATOLL ELECTRONIQUEPage 5Page 4

CONNECTING

8) ON/SLEEP led indicator.

DETAILS OF FUNCTIONS

1

567

8

(1)

Trigger input: this input allows you to control the power

ON/SLEEP of your PH200 simultaneously with any device

equipped with a compatible Trigger output. In order for the

system to work, the button on your PH200 must ON/SLEEP

remain in the position (0). If the switch is in the (I) SLEEPON

position, it will work but not the Trigger function.

The Trigger connection must be made with a Ø 3,5 mm Male/Male stereo

jack cable.

Jack cable

Ø 3,5 mm

234

The PH200 phono module allows you different configurable configurations. They

can be carried out directly at the rear of the module via the 2 4-point switch blocks,

one for the left channel and the other for the right channel (you can also refer to the

screen-printed diagrams on the rear side). Make sure that the 2 switch blocks are in

the same position.

1) MM – MC setting: Depending on the cartridge of your phono turntable, you can

select the MM or MC input.

2) Choice of input capacitor: This setting concerns both the MM and MC cells. It

allows you to adapt the musicality of your PH200 to your system.

• For an MM cell, set and to OFF.34

• For a high level MC cell (MCH), place to ON, 3

and to OFF.4

• For a MC Low Level (MCL) cell, set and to ON.34

• For no input capacitor set and to OFF 12

(recommended by default).

• To select a 100 pF capacitor set to ON, and to 12

OFF.

• To select a 220 pF capacitor place to OFF, and 1

2 to ON.

• To select a 320 pF capacitor set to ON, and to 12

ON.

CONFIGURATIONS

3 4

MMOFFOFF

MC HighONOFF

MC LowONON

12

DefaultOFFOFF

100 pFONOFF

220 pFOFFON

320 pFONON

Caution: This adjustment must be made when the PH200 and the amplier

are turned off.

Caution: This adjustment must be made when the PH200 and the amplier

are turned off.

1) Ground.

2) Turntable signal input.

3) Settings blocks.

4) Module signal output.

5) Trigger input 12 V

(1)

.

6) General power plug.

7) ON/SLEEP switch (Attention: the

power-on led indicator takes a long

time to turn-off).

Produktspezifikationen