Audio-Technica AT-PL50 Bedienungsanleitung
Audio-Technica
DJ Ausrüstung
AT-PL50
Lies die bedienungsanleitung für Audio-Technica AT-PL50 (8 Seiten) kostenlos online; sie gehört zur Kategorie DJ Ausrüstung. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Audio-Technica AT-PL50 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
Automatic Stereo
Turntable System
AT-PL50
Installation and Operation
2
Automatic Stereo Turntable System
Installation and Operation
To prevent electric shock, do not remove the
cover. There are no user-serviceable parts
inside. Internal adjustments are for qualified
professionals only. Refer all servicing to
qualified service personnel.
Pour prévenir un choc électrique, ne pas ouvrir
le couvercle. Il n’y aucune pièces de rechanges
à l’intérieur. Tout ajustement interne doit être
fait par une personne qualifié seulement.
Référez tout réparation au personnel qualifié.
AVIS
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning: To prevent fire or shock hazard, do
not expose this appliance to rain or moisture.
Attention: Pour prévenir feu ou choc
électrique, ne pas exposé l’appareil à la pluie
ou à l’humidité.
Thank you for purchasing the AT-PL50. Audio-Technica has
been a leading manufacturer of innovative stereo phonograph
products for more than 40 years. We are pleased to provide this
turntable, with its excellent performance and many convenient
features, for your enjoyment.
The AT-PL50 stereo turntable system features:
• Fully automatic operation
• Two speeds: 331
/3rpm and 45 rpm
• Professional aluminum turntable platter
• Integral Audio-Technica Dual Magnet™phono cartridge with
replaceable diamond stylus
• Integral, switchable stereo phono pre-amplifier. Permits use of
turntable with stereo amplifiers having either magnetic-phono
inputs or “AUX” (high-level) inputs; also allows convenient
use of turntable with most powered speakers
• Damped Lift/cueing mechanism with front-panel control
• Handsome removable dust cover
To assure maximum satisfaction from this product, please read
the information and follow the instructions presented in this
manual. Please keep the manual in an accessible location for
future reference.
We suggest that you save all the packaging materials for
possible future storage, moving or shipping.
CAUTION: To avoid stylus damage, make certain the
included stylus guard is in place whenever the turntable
is being installed, moved or cleaned.
Introduction
Stylus assembly
Stylus (“Needle”)
Stylus guard
3
Initial Setup
Setting the Pre-amp Switch
For increased flexibility of use, this turntable has an internal
stereo phono pre-amplifier. The Pre-amp Selector Switch
is located under the turntable platter, in the rear-center
(Fig. 1). If the system amplifier you are using has a PHONO
input, set the Pre-amp Selector Switch to the “OFF”
position. If your amplifier does not have a PHONO input,
set the Pre-amp Selector Switch to the “ON” position and
connect the turntable’s output cables to the AUX or other
high-level input on the amplifier (described later).
Assembling the Turntable
1. Carefully place the turntable platter on the center
spindle, making certain the platter is fully seated on
the spindle.
2. While holding both ends of the red tape ribbon on the
turntable belt, carefully pull the belt over the motor
pulley (Fig. 2a). (If the belt drops off, remove the
turntable platter and put the belt back on it, as
described on page 6.)
3. Once the belt is seated in the pulley’s groove, carefully
remove the ribbon. Make certain the belt is not
twisted.
4. Place the turntable mat on top of the turntable platter
(Fig. 2b).
5. If desired, the hinged dust cover may be removed.
Hold both sides of the dust cover and pull upward
gently and evenly to detach the cover from the
turntable (Fig. 2c). Keep the cover in a safe, clean
place.
“AUX” PHONO
Input
Jacks
Pre-amp
Selector
Switch
Amplifier
White
Red
AC
AC
Figure 1 Inputs and pre-amp selector switch
2b Record mat
2c Dust cover removal
Figure 2 Assembling the turntable
2a Drive belt
Red ribbon Motor spindle
Drive belt
Produktspezifikationen
| Marke: | Audio-Technica |
| Kategorie: | DJ Ausrüstung |
| Modell: | AT-PL50 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Audio-Technica AT-PL50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung DJ Ausrüstung Audio-Technica
29 September 2024
4 August 2024
1 August 2024
28 Juli 2024
9 Juli 2024
27 Januar 2024
6 Dezember 2023
12 November 2022
13 Oktober 2022
Bedienungsanleitung DJ Ausrüstung
- Pyle Pro
- Sirus
- Technaxx
- Pepperdecks
- Konig & Meyer
- Kenton
- AV:link
- Muse
- Formula Sound
- TechniSat
- JTS
- Skytec
- Krüger And Matz
- Zomo
- RME
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
14 Juni 2025
11 Juni 2025
1 Juni 2025
15 Oktober 2024
8 Oktober 2024
2 Oktober 2024
28 September 2024
27 September 2024
26 September 2024