Audio-Technica AT875R Bedienungsanleitung
Audio-Technica
Mikrofon
AT875R
Lies die bedienungsanleitung für Audio-Technica AT875R (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Audio-Technica AT875R oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
LINE + GRADIENT CONDENSER MICROPHONE
- Designed for video production and broadcast (ENG/EFP)
audio acquisition
- Extremely short length (175mm) ideal for use with compact
digital cameras
- Provides the narrow acceptance angle desirable for long-
distance sound pickup
- Excellent sound rejection from the sides and rear of mic
- Tailored response minimizes camera and handling noise
- Operates on phantom power only
The AT875R requires 11V to 52V DC phantom power for
operation.
Output from the microphone’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” –
positive acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables
must be wired consistently: Pin 1-to-Pin 1, etc.
The high sensitivity of the AT875R assures useful output and
an excellent match to most input sources. In some cases,
however, an attenuator such as the Audio-Technica AT8202
may be required between the microphone and preamplier to
avoid overloading sensitive input stages.
The microphone is RoHS compliant–free from all substances
specied in the EU directive on hazardous substances.
Avoid leaving the microphone in the open sun or in areas
where temperatures exceed 43°C for extended periods.
Extremely high humidity should also be avoided.
FORM No. ATGC-L0120-07-E
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
same as 1 kHz
Machida • Tokyo • Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Line + gradient
FREQUENCY RESPONSE 90-20,000 Hz
OPEN CIRCUIT SENSITIVITY -30 dB (31.6 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 127 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 107 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIRMENTS 11 - 52V DC, 2 mA typical
WEIGHT (less cable and accessories) 80 g
DIMENSIONS 175.0 mm long,
21.0 mm diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for ⅝"-27
threaded stands;
⅝"-27 to ⅜"-16 threaded adapter;
windscreen;
protective carrying case
Produktspezifikationen
| Marke: | Audio-Technica |
| Kategorie: | Mikrofon |
| Modell: | AT875R |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Audio-Technica AT875R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikrofon Audio-Technica
Audio-Technica System 10 Stompbox ATW-1501 Bedienungsanleitung
6 September 2025
30 August 2025
15 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
Bedienungsanleitung Mikrofon
- Power Dynamics
- PureLink
- Singing Machine
- Livoo
- LyxPro
- Philips
- Chandler
- Neat
- DOCKIN
- Thronmax
- Nacon
- Purple Panda
- Numark
- Electro-Voice
- Ambient Recording
Neueste Bedienungsanleitung für -Kategorien-
18 Januar 2026
18 Januar 2026
18 Januar 2026
17 Januar 2026
15 Januar 2026
15 Januar 2026
15 Januar 2026
13 Januar 2026
10 Januar 2026
8 Januar 2026