Audio-Technica BP4029 Bedienungsanleitung
Audio-Technica
Mikrofon
BP4029
Lies die bedienungsanleitung für Audio-Technica BP4029 (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 38 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 19.5 Bewertungen. Hast du eine Frage zu Audio-Technica BP4029 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
STEREO SHOTGUN MICROPHONE
- Designed for broadcasters, videographers and sound recordists.
- Compact, lightweight design is perfect for camera-mount use.
- Independent line-cardioid and gure-of-eight condenser elements.
- Switchable low-frequency roll-o.
- Switch selection of non-matrixed M-S mode and two internally-matrixed
left/right stereo modes.
MID-SIDE OPERATION: In M-S mode, the BP4029 provides independent
Mid and Side signals. This allows the width of the stereo image to be
adjusted in post production or in the eld with a matrix mixer.
MATRIXED STEREO: The BP4029 oers two internally-matrixed modes
which provide traditional “left-right” stereo without the need for external
mixers. To accommodate varying acoustic environments, the user may
select between a “wide” pattern (LR-W) with increased ambient pickup,
and a “narrow” pattern (LR-N) which oers more rejection and less
ambience. Output phase is “Pin 2 hot.”
For correct left-right stereo orientation, position the microphone so the
word “UP” is on top, with the switches on the bottom. In all modes,
locating the BP4029 nearer the sound source enhances the apparent
width of the stereo image, while decreasing room ambience. Moving
away from the sound source will result in a narrower stereo image and
more “room sound.”
M-S Output Connector Pin 1 Pin 2 Pin 3
Mid XLR3M-Gray Ground Mid + Mid –
XLR5M Mic Connector: Pin 1 Pin 2 Pin 3
Side XLR3M-Red Ground Side + Side –
XLR5M Mic Connector: Pin 1 Pin 4 Pin 5
Matrix Output Connector Pin 1 Pin 2 Pin 3
Left XLR3M-Gray Ground L + L –
XLR5M Mic Connector: Pin 1 Pin 2 Pin 3
Right XLR3M-Red Ground R + R –
XLR5M Mic Connector: Pin 1 Pin 4 Pin 5
The BP4029 requires 11V to 52V DC phantom power on both XLR3M
connectors. Wiring must be balanced throughout, and all mic cables in
the system must be wired consistently: Pin 1-to-Pin 1, etc. If connecting
to unbalanced inputs, good-quality balanced line transformers must be
used.
The microphone is RoHS compliant–free from all substances specied in
the EU directive on hazardous substances.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43° C for extended periods. Extremely high humidity
should also be avoided.
FORM No. ATGC-L0113-07-E
Machida • Tokyo • Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Line-cardioid and gure-of-eight
FREQUENCY RESPONSE 40-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY
(Mid / Side / LR Stereo)
-30 dB (31.6 mV) re 1V at 1 Pa
-34 dB (19.9 mV) re 1V at 1 Pa
-36 dB (15.8 mV) re 1V at 1 Pa
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL
(Mid / Side / LR Stereo)
123 dB / 127 dB / 126 dB SPL,
1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)
(Mid / Side / LR Stereo)
101 dB / 101 dB / 102 dB,
1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO
(Mid / Side / LR Stereo)
72 dB / 68 dB / 70 dB,
1 kHz at 1 Pa
PHANTOM POWER REQUIRMENTS 11 - 52V DC, 4 mA typical at 48V
SWITCHES M-S, LR Stereo-Wide (LR-W),
LR Stereo-Narrow (LR-N);
Flat, roll-o
WEIGHT (less cable and accessories) 103 g
DIMENSIONS 236.0 mm long,
21.0 mm diameter
OUTPUT CONNECTOR Integral XLR5M-type
CABLE Dual 0.61 m shielded,
two-conductor, terminated in
two XLR3M-type connector
ACCESSORIES FURNISHED AT8405a stand clamp for ⅝"-27
threaded stands;
AT8134 foam windscreen;
⅝"-27 to ⅜"-16
threaded adapter;
protective carrying case
Specications are subject to change without notice.
1 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Mid
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Roll-o
1 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Side
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
1 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
1 kHz
LR Stereo-Wide (LR-W)
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
1 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
1 kHz
LR Stereo-Narrow (LR-N)
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Produktspezifikationen
| Marke: | Audio-Technica |
| Kategorie: | Mikrofon |
| Modell: | BP4029 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Audio-Technica BP4029 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikrofon Audio-Technica
Audio-Technica System 10 Stompbox ATW-1501 Bedienungsanleitung
6 September 2025
30 August 2025
15 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
12 August 2025
Bedienungsanleitung Mikrofon
- Tannoy
- Comica
- Intricon
- Techly
- Shadow
- Earthworks
- ENDORFY
- Adam Hall
- PSC
- Switchcraft
- Kogan
- Perrycom
- Evno
- DNA
- Tonor
Neueste Bedienungsanleitung für -Kategorien-
18 Januar 2026
18 Januar 2026
18 Januar 2026
17 Januar 2026
15 Januar 2026
15 Januar 2026
15 Januar 2026
13 Januar 2026
10 Januar 2026
8 Januar 2026