Audix A10x Bedienungsanleitung


Seiten 1 Engels Ohrhörer

Lies die Bedienungsanleitung für Audix A10x kostenlos online oder lade das PDF herunter. 29 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

A10X
STUDIO-QUALITY EARPHONES
WITH EXTENDED BASS
OVERVIEW
The A10X Earphones are designed for the ultimate immersive listening
experience. At the heart of the earphone is a dynamic low-mass moving coil
assembly and composite beryllium diaphragm delivering over ten octaves of
balanced frequency response and extended bass. With exceptional imaging,
isolation and phase coherence, the A10X accurately presents the full details
of your music.
FEATURES
• 10 mm dynamic driver with beryllium diaphragm for precise imaging and
low distortion
• High-energy balanced response with extended bass
• Optimized silicone ear tips (S, M, L) for strong seal and isolation
• Gold-plated MMCX connectors allow for 360-degree rotation for ideal
positioning
• Reinforced wire wrap near the connector holds the earphone confidently
in place
• Premium silver-plated, oxygen-free copper cable in a durable soft coat
jacket with gold-plated 3.5 mm (1/8 in) plug
SUPPLIED ACCESSORIES
• Protective carrying case
• Detachable 1.5 m cable
• Small, medium and large pairs
of silicone ear tips
NOISE ISOLATION POLAR PATTERN
Noise isolation is the measure of sound attenuation levels achieved with A10
earphones that have been properly fitted in the ear canals with the supplied
silicone ear tips. The noise isolation polar pattern illustrates how attenuation
of the A10X earphones varies as a function of both frequency and direction
of the sound source. In general, lower frequencies are less attenuated than
higher frequencies and sound sources coming the side of the head are less
attenuated than from the front or back. Audix earphones do not carry a Noise
Reduction Rating and are not meant to be used as a hearing protection device.
0 dB
0 dB
-10
-10
-20
-20
-30
-30
-40
-40
2 K
4 K
8 K
16 K
125
250
500
1 K
SPECIFICATIONS
Operating PrincipleDynamic – moving coil
Sensitivity (@ 1 kHz)107 dB SPL/mW
Frequency Response10 Hz – 19 kHz
Impedance 35 Ohms
Noise Isolation*25 dB @ 1 kHz
*See noise isolation polar pattern
Driver Size10 mm
Diaphragm Beryllium Alloy
Magnet Neodymium
Shell Crystal Polycarbonate,
tuned and vented
Connectors MMCX, 3.5 mm (1/8 in)
Cable 1.5 m detachable MMCX,
braided, oxygen-free
copper, 40 µin silver-plated
© 2021 Audix Corporation. Audix is a registered trademark of the Audix corporation.
Specifications subject to change without notice.
For service and warranty information, visit audixusa.com
A10X Spec Sheet v1.1

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Audix
Kategorie: Ohrhörer
Modell: A10x
Bluetooth: Nein
Produkttyp: Kopfhörer
Empfohlene Nutzung: Bühne/Studio
Headset-Typ: Binaural
Tragestil: im Ohr
Produktfarbe: Schwarz
3,5-mm-Anschluss: Ja
Übertragungstechnik: Kabelgebunden
Position Kopfhörerlautsprecher: Im Ohr
Kopfhörerfrequenz: 10 - 19000 Hz
Impedanz: 35 Ohm
Mikrofon-Typ: Nicht verfügbar
Kabellänge: 1.5 m
Gehäusematerial: Polycarbonat (PC)
Kopfhörer-Empfindlichkeit: 107 dB
Magnettyp: Neodym
Treibereinheit: 10 mm
Intraural Ohrhörer Typ: Im Ohr Monitore
Ladestation: Nein
Treibertyp: Dynamisch
Membranwerkstoff: Beryllium-Legierung

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audix A10x benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten