Audix D-Clamp Bedienungsanleitung

Lies die bedienungsanleitung für Audix D-Clamp (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 15 Bewertungen. Hast du eine Frage zu Audix D-Clamp oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DCLAMP

OVERVIEW

The DCLAMP is a low profile, simple-to-use mounting system that eliminates the

need for bulky mic stands. Easily operated, the DCLAMP is provided with a standard

5/8” thread adapter, which allows most mics to be used by just simply changing the

clip. The DCLIP fits the D Series microphones and many pencil condenser mics.

The DCLAMP works on most tension rods used with hand percussion instruments

(such as congas and bongos) as well as standard 9.5 mm and 10.5 mm knurled rods

found on tom and percussion mounts. It provides a nice clean look especially when

used with the Audix right angle XLR mic cable CBLDR25.

The DCLAMP can also be used with the MicroD small condenser mic by simply

replacing the DCLAMP’s gooseneck with the MicroD gooseneck. This allows the

MicroD to be used in tight spaces (congas, timbales, bongos) where a larger dynamic

mic may be hard to position.

PLACEMENT

For best results, position the head of the mic approximately two inches above the

drum head and aimed towards the center of the drum (usually about 45° angle).

Depending on the size and type of microphone being used, the height of the metal

gooseneck will have to be adjusted. Simply loosen the wing nut on the side of the

clip and move the gooseneck into the proper position then tighten. The gooseneck

can also be angled in any direction to achieve the desired position.

Microphone placement is not an exact science. It depends on the instrument, the

player’s style, the type of music, the loudness of the music, the room acoustics, the

sound system, the engineer and, of course, the microphone itself. The DCLAMP is

designed to offer maximum flexibility in mic positioning to yield the best possible

sound.

Experimentation is ultimately the key to achieving the best results for each application.

For more ideas go to

www.audixusa.com.

Tension Rod

Mic Mount

FEATURES

. Flexible multi-position metal gooseneck

. Locks firmly into position

. Fingertip control

. Lightweight, durable and scratch resistant

. Eliminates bulky mic stands

. Works with most microphones

. 1 year warranty

Works with MicroD

(pictured) and other

miniaturized mics.

Works with a wide variety

of dynamic mics. (pictured

with the D2)

Works with condenser

microphones. (pictured

with the SCX1C)

Produktspezifikationen