Auriol 2-LD3041 Bedienungsanleitung

Lies die bedienungsanleitung für Auriol 2-LD3041 (6 Seiten) kostenlos online; sie gehört zur Kategorie Armbanduhr. Dieses Handbuch wurde von 51 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 5 Bewertungen. Hast du eine Frage zu Auriol 2-LD3041 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage











WRISTWATCH

Intended use

This electronic appliance is intended for time display. Any

other use or modification of the electronic appliance does

not comply with the intended uses. The manufacturer is

not liable for damages caused by improper use or

misuse. The device is not intended for commercial use.

Cleaning instructions

Clean the product with a dry, lint-free cloth. A glasses

cleaning cloth is ideal.

Time setting: Watch without date display

Carefully pull the crown out all the way. By turning the

crown you may set the time. To finish the setting press

the crown back in all the way.

Time setting: Watch with date display

To set the time, carefully pull the crown out all the way.

By turning the crown you may set the time. Carefully

press the crown back in halfway to the case. The date

can be set by turning the crown. To finish the setting

press the crown back in all the way.

Replacement of battery (SR626SW)

Battery replacements must be performed by an expert to

avoid damaging the case or gaskets.

Warranty

We provide a 3-year warranty for this item. The warranty

period starts from the date of sale (receipt, proof of

purchase). Within this period we rectify all faults which

are attributable to material and manufacturing defects at

no cost. For damage which is attributable to improper

treatment, e.g. dropping, knocking, or water damage,

there is no warranty claim.

Water resistance

Water resistant up to 5 bar. The bar value specifies the

atmospheric overpressure which is applied during testing

(DIN 8310).

Strap Shortening Instructions

Your watch strap may be shortened in two ways.

1. At the buckle

Unlock the safety cover (if applicable) and open the

buckle. The strap is held in position by a spring bar. The

spring bar can be compressed with a pointed tool to

enable shortening of the strap. Move the strap to the

desired position and allow the spring bar to lock into

place.

2. At the strap

Shortening of the strap can also be achieved by

removing segments. Open the buckle and remove the

spring bar as described in part 1.

Place the watch on a soft surface with the dial facing

downward. The segments that can be removed are

marked with an arrow. Push a pointed tool into the

opening on the backside of the strap and push the bolt

out of the strap in the direction of the arrow. Pull out the

bolt (you may need to use tweezers).

The strap can now be disassembled.

Remove as many segments as necessary in the

described fashion and reassemble the strap by pushing

the bolt inwards in the opposite direction of the arrow.

Reassemble the buckle with the spring bar.

Disposal of the electronic appliance

This electronic appliance may not be disposed of

with normal household waste. Dispose of the unit

at an approved disposal facility or at your local

recycling centre. Please observe the current rules

and regulations when disposing of the appliance.

Contact the disposal system if in doubt.

Disposal of the batteries

Please dispose of your batteries properly in

containers especially set up at retailers. Batteries

do not belong in household waste. Dispose of the

batteries at an approved disposal facility or at your

local recycling centre.

Contact the disposal system

if in doubt.

Produktspezifikationen