Avantco 177SL612A Bedienungsanleitung
Avantco
Schneidemaschine
177SL612A
Lies die bedienungsanleitung für Avantco 177SL612A (15 Seiten) kostenlos online; sie gehört zur Kategorie Schneidemaschine. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Avantco 177SL612A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/15
User Manual
www.AvantcoEquipment.com 1
Meat Slicer Instruction Manual
Models: 177SL612A, 177SL713A
Please read and keep these instructions. Indoor use only.
02/2022
User Manual
User Manual
2 www.AvantcoEquipment.com
Unpacking:
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
These instructions must be followed for us to guarantee our full support of your claim for
protecting against loss from concealed damage. The form for filing such a claim will be
provided by the carrier.
General Installation And Operation
Instructions:
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. The unit can be operated in either MANUAL or AUTO feed modes.
5.1 MANUAL MODE
Ensure the control lever H in diagram 1 is position A. This handle disengages
auto feed function.
Switch on the blade motor only and using the handle on the food pusher, push
the carriage back and forth to
begin cutting the food.
5.1 AUTO FEED MODE
Ensure the control lever H in diagram 1 is in position B. This handle engages
the auto feed function.
Switch on the blade motor rst and then the auto feed motor. The unit will now
automatically cut the meat oaded.
6. After you are nished cutting, turn off machine and collect the product slices in the exit area.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
Diagram 1
A B
H
Produktspezifikationen
| Marke: | Avantco |
| Kategorie: | Schneidemaschine |
| Modell: | 177SL612A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Avantco 177SL612A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Avantco
7 Juli 2025
6 Juli 2025
11 August 2024
10 Mai 2024
27 Februar 2024
Bedienungsanleitung Schneidemaschine
- Efbe-Schott
- Mia
- FAC
- Khind
- Zelmer
- Bifinet
- Exquisit
- PowerTec Kitchen
- Nesco
- Orbegozo
- Kinzo
- Unold
- Princess
- Hobart
- Louis Tellier
Neueste Bedienungsanleitung für -Kategorien-
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025