AXESS AXLOC-HYKIA3 Bedienungsanleitung

Lies die bedienungsanleitung für AXESS AXLOC-HYKIA3 (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 7 Bewertungen. Hast du eine Frage zu AXESS AXLOC-HYKIA3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXLOC-HYKIA3

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/15/22 INSTAXLOC-HYKIA3

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip-ties

TABLE OF CONTENTS

Applications.............................................................1

Installation ............................................................. 2

Diagram .................................................................. 3

APPLICATIONS

KIT COMPONENTS

• AXLOC-HYKIA3 Wiring Harness

• Gain Controller

• 12v-500mA Remote Wire

• Auxiliary Cable

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle specific applications.

• Designed to provide (2) channels of low-level audio output from the factory system.

• Allows for the installation of an amplifier for speakers or subwoofers.

• Gain Controller included to adjust the overall output.

• 12v-500mA remote wire activated with signal sense.

• 55-watts per channel.

• Designed for non-amplified vehicles.

Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.

Hyundai/Kia LOC (Line Output Converter)

AXLOC-HYKIA3(for Non-Amplified Vehicles) 2017-Up

For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the Vehicle Fit GuideRadio Install Kits for .

Hyundai

Accent 2018-Up

Elantra 2017-Up

Elantra GT 2018-Up

IONIQ 2018-Up

Kona 2018-Up

Santa Fe 2019-Up

Santa Fe XL 2019

Sonata 2018-Up

Tucson 2019-Up

Veloster 2019-Up

Kia

Cadenza 2017-Up

Forte 2017-Up

Forte 5 2017-Up

K5 2021-Up

Optima 2019-2020

Sedona 2017-Up

Sorento 2017-Up

Stinger 2018-Up

Produktspezifikationen