Axing BWZ 5-02 Bedienungsanleitung

Axing Nicht kategorisiert BWZ 5-02

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Axing BWZ 5-02 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.6 Sternen bewertet

Download PDF

Seite 1/2

State of the art 2013-08-01 - Reserving change in design and type - We cannot be held liable for printing errors

This symbol indicates that this product is not to be disposed of with your

household waste, according to the WEEE Directive (2002/96/EC) and your

national law.

This product should be handed over to a designated collection point, e.g.,

on an authorized one-for-one basis when you buy a new similar product or

to an authorized collection site for recycling waste electrical and electronic

equipment (WEEE).

For more information about where you can drop off your waste equipment

for recycling, please contact your local city office, waste authority, approved

WEEE scheme or your household waste disposal service.

WEEE Nr.

DE14023300

OPERATION INSTRUCTIONS

Stripping Tool

BWZ 5-02

Technical data:

Stripping using the stripping block

Stripping dimension of AXING -linepremium

antenna sockets 8/13 mm

Stripping dimension of Axing compr. connector* 7/6 mm

Cables that can be used: SKB 88-xx

SKB 89-xx

SKB 395-xx

SKB 92-xx

SKB 93-xx

and cables with a dielectric diameter of 4,7 ± 1 mm

Stripping of cables 2,7-6,7 mmØ

Cutting blade for coaxial cables max. 8 mmØ

*CFS 93-xx/CFS 97-xx

Note: Not suitable for cables with steel wire or stranded

steel wire

Risk of cutting and crushing!

Do not place your fingers between the blades or

jaws of the stripper!

Hersteller

AXING AG

Gewerbehaus Moskau

CH-8262 Ramsen

EWR-Kontaktadresse

Bechler GmbH

Am Rebberg 44

D-78239 Rielasingen

Product description:

The stripping tool BWZ 5-02 has been designed especially for Axing cable types SKB 88/89/395/92/93, but can also be

used with other cables that have a dielectric diameter of 4.7 ± 1 mm.

It is provided with a reinsertable stripping block with fixed stripping dimensions.

The stripping dimension 8/13 mm is intended for all AXING premium line antenna sockets, the stripping dimension 7/6 mm for

compression connectors CFS 93-xx/97-xx.

The stripping of the outer sheath, shielding and dielectric is done in one step, and the tool can be used by both left- and right-

handed people.

The following stripping and cutting blades are available:

¬insertable stripping block: 8/13 mm AXING premium line antenna sockets

7/6 mm AXING compression connector

adjustable stripping blades: Ø 2.7 – 6.7 mm

®cutting blades for coaxial cables: Ø 0 – 8 mm

Work steps

¬Use of the stripping block:

To strip coaxial cables of stripping dimension 8/13 mm or 7/6

mm, the stripping block must be plugged in such that the

desired stripping dimension points upwards.

Open stripper, insert the coaxial cable in the curvature of the

block all the way and then close it again. While holding the

cable with the hand, fix the cable on the tool with the thumb

and rotate the stripper no more than 2-3 times by 360°.

Then open the stripper and remove the cable. Next remove

the cut outer sheath and the dielelectric from the cable.

Use of the stripping blade:

The stripping blade is used for stripping 2.7-6.7 mm in

diameter to any desired length. The stripping blade depth is

set using the upper thumbwheel.

Mark the required stripping dimension on the cable and set

the stripping blade to the diameter of the cable. Then open the

stripper, place the marked cable under the blade and close the

stripper.

While holding the cable with the hand, fix the cable on the tool

with the thumb and rotate the stripper no more than 2-3 times

by 360°.

Then open the stripper and remove the cable. Next remove

the cut outer sheath and the dielelectric from the cable.

®Use of the cutting blade:

The cutting blade is designed for cutting coaxial cables up to a

diameter of 8 mm maximum.

thumbwheel



Produktspezifikationen

Marke:	Axing
Kategorie:	Nicht kategorisiert
Modell:	BWZ 5-02
Produktfarbe:	Grün
Kompatible Produkte:	SKB 75, SKB 88, SKB 89, SKB 92, SKB 93, SKB 395
Ablösungskapazität (min):	1.4 mm
Ablösungskapazität (max):	13 mm
Kabeldurchmesser (max.):	8 mm